Cisco IP CONFERENCE STATION 7936 Administration Manual page 66

Verifying System Settings
System Setting
CallManager 1 (CM1)
Address,
CallManager 2 (CM2)
Address,
CallManager 3 (CM3)
Address
Main TFTP,
Secondary TFTP,
Tertiary TFTP
Alt TFTP Addr
Alt TFTP
Boot Load ID
App Load ID
HW (hardware)
Revision
SW (software)
Version
Dial Tone
Cisco IP Conference Station 7936 Administration Guide
3-6
Description
Identifies the Cisco CallManager
systems that are available for
processing calls from this
IP Conference Station.
One of the Cisco CallManager
addresses will be displayed on the
screen as active (A) and the other
will be displayed as standby (S).
Indicates the Trivial File Transfer
Protocol (TFTP) Server IP
addresses used by the
IP Conference Station to obtain
configuration files and the
conference station's firmware.
Indicates an Alternate TFTP
Server address used by the
IP Conference Station to obtain
configuration files and firmware.
Indicates whether or not an
Alternate TFTP Server is enabled
(yes/no).
Indicates the current load ID of the
phone's firmware.
Indicates the current load ID of the
phone's software.
Indicates the hardware revision
level.
Indicates the firmware version
loaded on the
IP Conference Station.
Indicates the dial tone setting on
the IP Conference Station.
Chapter 3 Configuring the Cisco IP Conference Station 7936
Usage Notes
These IP addresses are set automatically
by Cisco CallManager.
The IP addresses are set automatically if
DHCP is enabled.
Note Secondary and tertiary TFTP
servers are supported if they are
configured using DHCP
option 150.
This IP address must be manually set.
Secondary and tertiary TFTP
Note
servers are supported if they are
configured using DHCP
option 150.
This configuration must be manually set.
This is set automatically by the
IP Conference Station.
This is set automatically by the
IP Conference Station.
This number is set automatically by the
IP Conference Station.
This number is set automatically by the
IP Conference Station.
The default is Tone 1.
OL-4746-01