Configure Before Scan - Visioneer STROBE XP 300 User Manual

70 V S
ISIONEER TROBE
Right-click on Configure Before
Scan to get the menu, and choose
the interface to use for configuring.
XP 300 S U '
CANNER SER S
C B S
ONFIGURE EFORE
Choosing Configure Before Scan simply opens a scanning interface
when you insert a piece of paper or click a scan button. You can then use
that interface to change the Resolution, Scan Mode, and other settings.
When you scan, the scanned image will still be sent as the file type and
to the same Destination Application already selected in the OneTouch
Properties window for that button.
T S C B
O ET ONFIGURE EFORE
1. Open the OneTouch Properties window.
2. Right-click on Configure Before Scan and choose an interface to
use for configuring before scanning.
TWAIN—The TWAIN Interface appears for you to configure the
scanning. See "Scanning from TWAIN Software" on page 95.
WIA—The Windows Image Acquisition Interface (WIA) appears
for you to configure the scanning. See "Scanning from the WIA
Interface" on page 111.
3. Click OK or Apply on the OneTouch Properties window.
G
UIDE
CAN
S :
CAN