Visioneer STROBE XP 300 User Manual page 37

30 V S
ISIONEER TROBE
XP 300 S U '
CANNER SER S
3. Click the Properties button.
The Device Configuration Properties window for the Visioneer
Strobe XP opens.
4. Uncheck the option, Enable the generation of events when paper
is inserted into the scanner. This turns off the AutoLaunch
feature.
5. Click OK, then click OK on the Hardware Properties window.
6. To turn the AutoLaunch feature back on later, follow the same
process, but click Reset Device or re-select the AutoLaunch option,
and click OK.
G
UIDE