Cover Page Registration (Default Settings) - Kyocera FS-1128MFP Driver Manual

Using Cover Pages

Cover Page Registration (Default Settings)

Template Selection
3-6
If the Cover Page is registered in the Default Settings, the action of
selecting the Cover Page for each transmission can be omitted.
Select the Cover Page template to be registered in the Default Settings.
The registration method is as follows.
1
Perform the Default Settings Dialog Box procedure shown on page 2-9,
open the Default Settings dialog box, and click on the Cover Page tab.
2 Place a check in the Attach Cover Page checkbox.
3 Select a Cover Page template from the Cover Page Templates list.
NOTE:
Original Cover Page templates can be created. Refer to Creating
New Cover Page Templates on page 3-8.
4 Click on the Preview button. A preview of the currently selected template
will be displayed.
To display a different template, use the drop-down menu at the top of the
dialog box or click on the  or  button. The template display
magnification can also be changed within the range of 25 to 250% from the
drop-down menu.