Default Settings Dialog Box - Kyocera FS-1128MFP Driver Manual

Default Settings Dialog Box

(1) Sending Options Tab
By setting the transmission conditions that you use most in this dialog box,
you can minimize the need to change the settings each time.
The Default Settings dialog box can be accessed by the following
procedure:
Click the Start button on the taskbar and then click Control Panel. Click
to open Printers in that order from the successive menus to access the
Printers dialog box. Right click the name of the machine to be used as the
network fax and select Printing Preferences from the resulting drop-down
menu. Click the FAX TX Setting button in the Printing Preferences
window.
1
FAX Delayed Transmit checkbox
Check the checkbox in order to activate the time fields to the right
of the checkbox whenever you want to set the time that your
documents will be transmitted. The desired time setting can be
entered directly with the keyboard or by clicking on the  and 
arrows. Enter the time on a 24-hour time basis (00:00 - 23:59).
IMPORTANT: If the time that is shown in the message display of this fax
machine does not match the current time, communications that use the
timer may not be accomplished as expected. If the displayed time is not
current, be sure to adjust it to match the correct time.
NOTE:
If you designate a time that is earlier in the day than the time that
is actually displayed in the fax machine itself, the transmission operation
will be carried out the following day at that time. Be sure to confirm the
time setting in the fax machine itself before making this setting.
2
Transmit and Print checkbox
Check the checkbox when you want to print out the documents at
the fax machine same time as you send them by fax.
1
2
Sending a Fax
2-9