Basic Operation For Delivering Files - Ricoh Aficio MP 3500SP Scanner Reference

Basic Operation for Delivering Files

This section describes the basic operation for delivering scan files using the net-
work delivery scanner.
Important
❒ You must register destinations and senders in advance using the ScanRouter
delivery software installed on the delivery server.
A
Make sure that no previous settings remain.
If a previous setting remains, press the {Clear Modes} key.
B
If the E-mail screen or Scan to Folder screen appears, switch to the network
delivery scanner screen.
For details, see "Switching to the Network Delivery Scanner Screen".
C
Place originals.
D
If necessary, press [Scan Settings] to specify scanner settings such as scan
type, resolution, image density, or scan size.
For details, see "Various Scan Settings".
E
If necessary, press [1 Sided Orig.] or [2 Sided Orig.] to scan one or both sides of
the originals.
For details, see "Setting for Scanning Sides of Originals".
F
If necessary, press [Original Feed Type] to specify settings such as original ori-
entation.
For details, see "Setting of Original Feed Type".
G
Specify the destination.
You can specify multiple destinations.
For details, see "Specifying Delivery Destinations".
H
If necessary, press [Attach Sender's Name] to specify the sender.
For details, see "Specifying the Sender".
Basic Operation for Delivering Files
4
83