Basic Operation For Scanning Using The Control Panel; Basic Operation For Sending Scanned Files Via E-Mail - Ricoh SP 5200S Initial Manual
Ricoh initial guide for scanner and fax
Hide thumbs
Also See for SP 5200S:
- Operating instructions manual (372 pages) ,
- Service manual (667 pages) ,
- Quick manual (6 pages)
Table of Contents
Advertisement
1. Using the Scanner Function
Basic Operation for Scanning Using the Control
Panel
1
Basic Operation for Sending Scanned Files via E-mail
The section describes how to use Scan to E-mail to send a scanned file to a destination selected from the
Address Book.
1.
Make sure that no previous settings remain.
If a previous setting remains, press the [Clear Modes] key.
2.
Select the "E-mail" tab.
3.
Place originals.
4.
Specify the following scanner settings as necessary.
• Scan Settings: specify a scanning resolution and size.
• Density: specify a scanning density.
• Original Feed Type: select one-sided or two-sided scanning and image orientation.
• Send File Type / Name: specify a file format and file name.
5.
Press the Destination key registered with the desired destination.
22
Advertisement
Table of Contents
