Management Commands - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

This chapter describes the management commands available in the managed switch CLI.
The Management Commands chapter contains the following sections:
• "Configuring the Switch Management CPU" on page
• "Network Interface Commands" on page
• "Console Port Access Commands" on page
• "Telnet Commands" on page
• "Secure Shell (SSH) Commands" on page
• "Management Security Commands" on page
• "Hypertext Transfer Protocol (HTTP) Commands" on page
• "Access Commands" on page
• "User Account Commands" on page
• "aaa ias-user username" on page
• "RADIUS Commands" on page
• "TACACS+ Commands" on page
• "Configuration Scripting Commands" on page
• "Pre-login Banner and System Prompt Commands" on page
• "Switch Database Management (SDM) Templates" on page
Warning: The commands in this chapter are in one of three functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration
setting.
• Clear commands clear some or all of the settings to factory defaults.

Management Commands

7-4.
7-8.
7-11.
7-16.
7-19.
7-28.
7-29.
7-46.
7-59.
7-73.
7-77.
v1.0, November 2010
Chapter 7
7-2.
7-20.
7-79.
7-80.
7-1