NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 176
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
ip arp inspection validate
Use this command to enable additional validation checks like source-mac validation, destination-
mac validation, and ip address validation on the received ARP packets. Each command overrides
the configuration of the previous command. For example, if a command enables src-mac and dst-
mac validations, and a second command enables IP validation only, the src-mac and dst-mac
validations are disabled as a result of the second command.
Default
disabled
Format
ip arp inspection validate {[src-mac] [dst-mac] [ip]}
Mode
Global Config
no ip arp inspection validate
Use this command to disable the additional validation checks on the received ARP packets.
Format
no ip arp inspection validate {[src-mac] [dst-mac] [ip]}
Mode
Global Config
ip arp inspection vlan logging
Use this command to enable logging of invalid ARP packets on a list of comma-separated VLAN
ranges.
Default
enabled
Format
ip arp inspection vlan vlan-list logging
Mode
Global Config
no ip arp inspection vlan logging
Use this command to disable logging of invalid ARP packets on a list of comma-separated VLAN
ranges.
Switching Commands
v1.0, November 2010
3-135
Advertisement
Table of Contents
