NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 229

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no dos-control smacdmac
This command disables Source MAC address = Destination MAC address (SMAC=DMAC)
Denial of Service protection.
Format
no dos-control smacdmac
Mode Global Config
dos-control tcpport
This command enables TCP L4 source = destination port number (Source TCP Port =Destination
TCP Port) Denial of Service protection. If the mode is enabled, Denial of Service prevention is
active for this type of attack. If packets ingress with Source TCP Port =Destination TCP Port, the
packets will be dropped if the mode is enabled.
Default disabled
Format
dos-control tcpport
Mode Global Config
no dos-control tcpport
This command disables TCP L4 source = destination port number (Source TCP Port =Destination
TCP Port) Denial of Service protection.
Format
no dos-control smacdmac
Mode Global Config
dos-control udpport
This command enables UDP L4 source = destination port number (Source UDP Port =Destination
UDP Port) Denial of Service protection. If the mode is enabled, Denial of Service prevention is
active for this type of attack. If packets ingress with Source UDP Port =Destination UDP Port, the
packets will be dropped if the mode is enabled.
Switching Commands
v1.0, November 2010
3-188