Table of Contents
Advertisement
Table 3: Download Locations for NSM 2010.4 (Requires Log In) (continued)
NSM Software
URL
NSM Server
https://download.juniper.net/software/nsm/2010.4q21/nsm2010.4q21_servers_sol_sparc.zip
(Solaris)
https://download.juniper.net/software/nsm/2010.4q21/nsm2010.4q21_servers_linux_x86.zip
(Linux)
MD5 checksum
https://download.juniper.net/software/nsm/2010.4q16/md5sum.txt
Compatibility with Juniper Networks Infranet Controller
Browser Requirements
Upgrading IDP Software
Copyright © 2011, Juniper Networks, Inc.
NOTE: NSMXpress users should consult
to upgrade NSMXpress to a patch version of NSM.
The user-role-based policy feature depends on deployment with IC Series Unified Access
Control (UAC) 4.1r1 or later. Contact your Juniper Networks sales representative for
information on UAC release dates.
The ACM, QuickStart utility, and IDP Reporter have been tested on the following browsers:
Internet Explorer 7.x, 6.x
Firefox 3.x, 2.x
During upgrade, the IDP Series appliance is gracefully shut down. If you have configured
bypass for traffic interfaces, you do not need to be concerned about traffic disruption. If
you have not configured bypass, you should plan to complete your upgrade at an
appropriate time.
You can use NSM or the CLI to upgrade the IDP OS. You must use NSM to complete the
IDP detector engine and attack object updates.
TIP: If possible, use a laptop to connect to the console port of the IDP Series
device when you upgrade. This will enable you to view any console messages
that can assist in identifying any issues during upgrade. We understand this
is not possible or desirable in all deployments, so connecting via console is
not required to upgrade.
Compatibility with Juniper Networks Infranet Controller
for information on how
KB 13946
7
Advertisement
Table of Contents
