Upgrading With Nsm - Juniper IDP OS 5.1R1 - RELEASE NOTES REV 1 Release Note

Juniper Networks Intrusion Detection and Prevention Release Notes

Upgrading with NSM

8
This section provides the following upgrade workflows to upgrade a standalone IDP
Series device:
Upgrading with NSM on page 8
Upgrading with the CLI on page 10
NOTE: Upgrading an HA deployment involves special considerations. For
information on upgrading an HA deployment, see "
IDP OS 4.1r4 Cluster to IDP OS 5.1
This section describes a workflow for upgrading IDP software using only NSM.
To update IDP software:
Add the IDP software to the NSM GUI server.
1.
Push the IDP software from the NSM GUI server to one or more IDP Series devices.
2.
To add an IDP software image to the NSM GUI server:
Download the software image:
1.
Go to
https://www.juniper.net/customers/csc/software/
a.
customer username and password.
Enter the IDP Series device serial number to display a view of applicable software
b.
releases available for download.
Click the applicable link to display the software download page.
c.
Download the software to a location you can access from your NSM client.
d.
From the NSM main menu, select Tools > Software Manager to display the Software
2.
Manager dialog box.
Click the + button to display the Open dialog box.
3.
Select the IDP software image you just downloaded and click Open to add the software
4.
image to the NSM GUI server.
Click OK.
5.
To push the software image from the NSM GUI server to IDP Series devices:
From the NSM main menu, select Devices > Software > Install Device Software to
1.
display the Install Device Software dialog box.
From the Select OS Name list, select ScreenOS/IDP.
2.
From the Select Software Image list, select the image file you just added to the NSM
3.
GUI server.
Workflow: Upgrading an
" in
IDP Series Deployment Scenarios
and log in with your
Copyright © 2011, Juniper Networks, Inc.
.