Table of Contents
Advertisement
Next Steps:
Copyright © 2011, Juniper Networks, Inc.
NOTE: You might encounter unexpected behavior if you have changed
the factory BIOS settings for the IDP Series device. We advise that you do
not change the factory BIOS settings.
The console will hang at GRUB after reboot if you have changed the BIOS
setting
Console redirection > Continue Console redirection after POST
.
ON
To resolve this issue, press the Delete key to enter BIOS and set this option
to
OFF
.
In the NSM Device Manager, right-click the device, select Adjust OS Version, and
5.
complete the wizard steps.
The software upgrade is complete.
If you are upgrading from IDP OS Release 5.0r1 or 5.0r2, skip this step. You completed
1.
it when you upgraded to IDP 5.0. If you are upgrading from IDP OS Release 4.1r4:
Run through the ACM wizard to
a.
you use ACM to configure deployment mode per virtual router.
If necessary, copy any custom settings from the backup copy of user_funcs to the
b.
new user_funcs file.
Check to see if J-Security Center has released an update for the detector engine or
2.
attack database:
From the NSM main menu, select Tools > View/Update NSM attack database and
complete the wizard steps.
Push the updated IDP detector engine to IDP Series devices:
3.
From the NSM main menu, select Devices > IDP Detector Engine > Load IDP Detector
Engine for ScreenOS and complete the wizard steps.
reconfigure your virtual routers
Upgrading IDP Software
to
. In IDP 5.0 and later,
11
Advertisement
Table of Contents
