Resolved Issues - Juniper IDP OS 5.1R1 - RELEASE NOTES REV 1 Release Note

Juniper Networks Intrusion Detection and Prevention Release Notes

Resolved Issues

Table 4: Resolved Issues
PR Description
Previously Unsupported Functionality
308133 IDP OS 4.1r4 did not support peer port modulation for 1 gigabyte fiber I/O modules. Beginning with IDP OS 5.0r2
(and continuing with IDP OS 5.1r1), we do support peer port modulation for 1 gigabyte fiber I/O modules.
Unexpected Behavior
417818 Resolved an issue where the SYN Protector rulebase had failed to reset the destination server connections when
configured in Passive mode.
430000 Resolved an issue that had caused speed and duplex settings to be auto-negotiated, even if auto-negotiation
was not configured. The issue had occurred on IDP200, IDP6000, and IDP1100.
438306 Resolved an issue where the close client action had not functioned when processing VLAN tagged MPLS traffic.
439660 Resolved an issue where VLAN Q in Q traffic had not been distributed among the IDP engines (IDP8200).
510099 Resolved an issue with the Radius PAM module that had resulted in Radius authentication for SSH to fail.
543532 Resolved an issue with idpLogReader debug logs where the IP address bits had been displayed in reverse order.
NSM displayed the logs correctly.
Configuration Issues
517629 Resolved an issue where ACM had rejected Radius username formats containing a period (for example, john.doe).
12
NOTE: Updating the IDP detector engine on a device does not require a
reboot of the device.
Push a security policy update job to update attack objects in use in your security policy:
4.
In NSM, select Devices > Configuration > Update Device Config.
a.
Select devices to which to push the updates and set update job options.
b.
Click OK.
c.
The following table describes issues that are resolved when you upgrade to from IDP OS
5.0r2 to IDP OS 5.1r1. If you are upgrading from IDP OS 5.0r1 or IDP OS 4.1r4, read the
release notes for the subsequent releases to learn about the issues that were resolved
in them.
Copyright © 2011, Juniper Networks, Inc.