Gsm7328S V2 Rear Panel; Gsm7352S V2 Front Panel And Leds - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Hardware Installation Manual

Managed Stackable Layer 3 Switches GSM7328S v2 and GSM7352S v2 Hardware Installation

GSM7328S v2 Rear Panel

The rear panel has two module bays, a console port, redundant power supply connector, and a
power module for the supplied power cord. The module bays support any combination of the
ProSafe 10-Gigabit Ethernet XFP Adapter (AX741), SFP+ Adapter (AX743), or the ProSafe 24-
Gigabit Stackable Module (AX742).
Console
Stacking/XFP
module bays
Figure 2-2

GSM7352S v2 Front Panel and LEDs

The figure below shows the front panel of the GSM7352S v2. The front panel contains LEDs, a
RST (reset) button, RJ-45 jacks, copper/fiber combo ports, USB port and 10G SFP+ ports.
LEDs
RST
(reset button)
Figure 2-3
2-4
Power supply
connector
Replaceable
power supply
RJ-45 jacks
v1.0, July 2009
AC Power
Connector
SFP ports
SFP+ ports
Introduction