NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Hardware Installation Manual page 33

Managed Stackable Layer 3 Switches GSM7328S v2 and GSM7352S v2 Hardware Installation
• Flow control: none
After you connect a console to the switch, you will need to configure the switch. The following
documents are provided for this purpose:
• Quick Installation Guide: Explains basic setup and configuration (provided as both a print
document and in PDF format on the Resource CD).
• Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches:
Gives detailed examples of how to use the CLI, and is located on the Resource CD.
• NETGEAR 7000 Series Managed Switch Administration Guide: Describes configuration tasks,
and is located on the Resource CD.
Hardware Installation
v1.0, July 2009
3-13