Xsm7224S Rear Panel; Safety Instructions - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Hardware Installation Manual

Managed Stackable Switch XSM7224S

XSM7224S Rear Panel

The rear panel has two fan trays, a power supply connector, a replaceable power supply, and
a bay for for an optional redundant power supply (APS300W).
Optional Power
Supply Bay
Figure 2. XSM7224S Rear Panel

Safety Instructions

Use the following safety guidelines to ensure your own personal safety and to help protect
your system from potential damage.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment,
observe the following precautions.
• Observe and follow service markings.
- Do not service any product except as explained in your system documentation.
- Opening or removing covers that are marked with the triangular symbol with a
lightning bolt may expose you to electrical shock. Only a trained service
technician should service components inside these compartments.
• If any of the following conditions occur, unplug the product from the electrical outlet and
replace the part or contact your trained service provider:
- The power cable, extension cable, or plug is damaged.
- An object has fallen into the product.
- The product has been exposed to water.
- The product has been dropped or damaged.
- The product does not operate correctly when you follow the operating instructions.
• Keep your system away from radiators and heat sources. Also, do not block cooling
vents.
• Do not spill food or liquids on your system components, and never operate the product in
a wet environment. If the system gets wet, see the appropriate section in your
troubleshooting guide or contact your trained service provider.
• Do not push any objects into the openings of your system. Doing so can cause fire or
electric shock by shorting out interior components.
Replaceable
Fan Trays
AC Power
Replaceable
Connector Power Supply
Chapter 1. Introduction | 7