NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Hardware Installation Manual page 39

Managed Stackable Layer 3 Switches GSM7328S v2 and GSM7352S v2 Hardware Installation
Table A-1. Technical Specifications (continued)
Feature
Performance
Power consumption
Dimensions
(W x D x H)
Environment
Electromagnetic
emissions and
immunity
Safety
Technical Specifications
GSM7328S v2
• Forwarding modes: Store-and-forward
• Network latency: Less than 80 microseconds for 64-byte frames in store-and-
forward mode for 10 Mbps to 100 Mbps transmission
• Addressing: 48-bit MAC address
• Acoustic noise: (ANSI-S10.12): 44 dB @ 25°C ambient temperature
• Heat dissipation: 260.488 Btu/hr for the GSM7328Sv2, 389.196 Btu/hr for the
GSM7352Sv2
76.3 W maximum 100-240VAC, 50–60
Hz universal input
17.3 x 15.4 x 1.7 inch (W x D x H)
(440 x 390.7 x 43.2 mm)
Operating:
• temperature: 32° to 122°F (0° to 50°C)
• humidity: 90% maximum relative humidity, noncondensing
• altitude: 10,000 ft (3,000 m) maximum
Storage:
• temperature: – 4° to 158°F (–20° to 70°C)
• humidity: 95% maximum relative humidity, noncondensing
• altitude: 10,000 ft (3,000 m) maximum
• CE mark, commercial
• FCC Part 15 Class A, VCCI Class A
• Class A EN 55022 (CISPR 22) Class A
• Class A C-Tick
• EN 50082-1
EN 55024
• CE mark, commercial
• CSA certified (CSA 22.2 #950)
• UL listed (UL 1950)/cUL IEC950/EN60950
v1.0, July 2009
GSM7352S v2
114 W maximum 100-240VAC, 50–60
Hz universal input
A-3