NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Hardware Installation Manual page 28

Managed Stackable Layer 3 Switches GSM7328S v2 and GSM7352S v2 Hardware Installation
High-Speed I/O Module Installation
The High-Speed I/O Module Bays can be used for inter-switch stacking or to install XFP 10-
Gigabit Ethernet modules. If you want to do both, you can stack the switch using two 24-Gigabit
Stackable Modules (AX742), and then use the remaining module bays for 10-Gigabit Ethernet
XFP Adapters (AX741) or 10-Gigabit Ethernet SFP+ Adapters (AX743). The modules and
adapters are sold seperately.
AX741 adapter
Figure 3-3
When the ProSafe 10-Gigabit Ethernet XFP Adapter (AX741) or ProSafe 10-Gigabit Ethernet
SFP+ Adapter (AX743) is in place, you can insert a standard 10-Gigabit Ethernet XFP or 10-
Gigabit Ethernet SFP+ optics module as shown:
AX741 adapter module
Figure 3-4
3-8 Hardware Installation
v1.0, July 2009