Cisco 15454-TCC - Network Processor Card Operation Manual page 30

Procedures
Provision a DCC Tunnel
Card Provisioning
Modify Line and Threshold Settings for the DS-1 Card
Modify Line and Threshold Settings for the DS-3 Card
Modify Line and Threshold Settings for the DS3E Card
Modify Line and Threshold Settings for the DS3XM-6 Card
Modify Line and Threshold Settings for the EC-1 Card
Provision Line Transmission Settings for OC-N Cards
Provision Threshold Settings for OC-N Cards
Provision an OC-N Card for SDH
Enable Intermediate-Path Performance Monitoring
Provision External Alarms
Provision External Controls
Provision AIC Orderwire
Convert DS1-14 Cards From 1:1 to 1:N Protection
Convert DS3-12 Cards From 1:1 to 1:N Protection
Performance Monitoring
View PMs
Select Fifteen-Minute PM Intervals on the Performance Monitoring Screen
Select Twenty-Four Hour PM Intervals on the Performance Monitoring Screen
Select Near End PMs on the Performance Monitoring Screen
Select Far End PMs on the Performance Monitoring Screen
Select Signal-Type Menus on the Performance Monitoring Screen
Use the Baseline Button on the Performance Monitoring Screen
Use the Clear Button on the Performance Monitoring Screen
Enable Pointer Justification Count Performance Monitoring
Ethernet Operation
Provision Ethernet Ports
Provision an EtherSwitch Point-to-Point Circuit (Multicard or Single-Card)
Provision a Shared Packet Ring
Provision a Hub and Spoke Ethernet Circuit
Provision a Single-card EtherSwitch Manual Cross-Connect
Provision a Multicard EtherSwitch Manual Cross-Connect
Cisco ONS 15454 Installation and Operations Guide
xxx
6-22
7-23
7-27
7-28
7-29
8-2
9-3
9-10
7-3
7-6
7-9
7-12
7-14
7-18
7-19
7-25
7-31
7-33
8-5
8-5
8-6
8-7
8-8
8-13
9-14
9-17
9-19
8-3
8-4
9-7
November 2001