Cisco WS-X6148-GE-TX - Switch Hardware Installation Manual page 44

Installing the Cisco UCS 6140XP Chassis in a Cabinet or Rack
S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m
Figure 2-4
Insert the chassis into the rack:
Step 4
Using both hands, position the chassis with the back of the chassis between the front posts of the
a.
rack.
Align the two rack-mount guides on either side of the chassis with the slider rails installed in the
b.
rack. Slide the rack-mount glides onto the slider rails, and then gently slide the chassis all the way
into the rack. If the chassis does not slide easily, try realigning the rack-mount glides on the slider
rails. See
Figure 2-5
Stabilize the chassis in the rack by attaching the front rack-mount brackets to the front rack-mounting
Step 5
rails:
Insert 2 screws (12-24 or 10-32, depending on rack type) through the cage nuts and the holes in one
a.
of the front rack-mount brackets and into the threaded holes in the rack-mounting rail.
Repeat for the front rack-mount bracket on the other side of the chassis. See
b.
Cisco UCS 6100 Series Fabric Interconnect Hardware Installation Guide
2-10
Installing the Slider Rails
Figure 2-5.
Sliding the Chassis Into the Rack
Chapter 2 Installing the Cisco UCS 6100 Series Fabric Interconnect
Figure 2-6.
OL-20036-02