Fan Module - Cisco WS-X6148-GE-TX - Switch Hardware Installation Manual

Fan Module

S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m
Table 1-3
Power Supply Condition
AC present, 3.3 voltage standby (VSB) on, and the power
supply unit is off.
Power supply on and OK.
If one power supply is installed in the chassis, but the other power supply slot is empty, a blank filler
panel should be used to cover the empty slot.
Figure 1-23
Fan Module
TheCisco UCS 6120XP fabric interconnect has slots for two fan modules. Each fan module houses 6
fans. The combination of 6 fans per module and 2 modules provides the chassis with 12 fans.
shows the fan module for the Cisco UCS 6120XP.
Figure 1-24
1
Cisco UCS 6100 Series Fabric Interconnect Hardware Installation Guide
1-16
Power Supply LED Descriptions (continued)
Blank Power Supply Filler Panel (N10-S1BLKP= Shown)
Cisco UCS 6120XP Fan Module (N10-FAN1=)
1
Fan module LED
Power LED Status
1 Hz blinking
On
Figure 1-23 shows a blank power supply filler panel.
Chapter 1 Product Overview
Fail LED Status
Off
Off
Figure 1-24
OL-20036-02