The Setup - Time Tab; Figure 6-2: Setup - Time - Linksys SRW224P - 10/100 - Gigabit Switch User Manual

Business series wireless-g access point with power over ethernet and rangebooster

Hide thumbs Also See for SRW224P - 10/100 - Gigabit Switch:

Table of Contents

Wireless-G Access Point with Power Over Ethernet and Rangebooster

• Subnet Mask. The Subnet Mask must be the same as that set on the LAN that your Access Point is connected

to. The default is 255.255.255.0.

• Default Gateway. Your ISP will provide you with the Default Gateway Address, which is the ISP server's IP

address.

• Primary DNS (Required) and Secondary DNS (Optional). Your ISP will provide you with at least one DNS

(Domain Name System) Server IP Address.

Select Automatic Configuration - DHCP if you have a DHCP server enabled on the LAN that can assign an IP

address to the Access Point.

Change these settings as described here and click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes. Help information is available on the right side of the screen.

The Setup - Time Tab

This allows you to change the Access Point's time settings. The correct time setting can help the administrator to

search the system log to identify problems.

Time

You can set the time either manually or automatically from a time server if the Access Point can access the public

Internet.

Manually. Select this option to set the date and time manually. The default is to set the time manually.

Automatically. Select this option and time zone. The Access Point will contact the public time server to get the

current time.

Automatically adjust clock for daylight saving changes. Select this option if you are in using the Access Point

in a location that observes daylight saving time.

User Defined NTP Server. Enable this option if you have set up local NTP server. Default is Disabled.

NTP Server IP. Enter the IP address of user defined NTP Server.

Change these settings as described here and click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes. Help information is available on the right side of the screen.

Chapter 6: Configuring the Wireless-G Access Point

The Setup - Time Tab

Table of Contents