The Wireless - Wireless Connection Control Tab; Figure 6-13: Wireless - Wireless Connection Control; Figure 6-14: Select Mac Address From Wireless Client List - Linksys SRW224P - 10/100 - Gigabit Switch User Manual

Business series wireless-g access point with power over ethernet and rangebooster
Hide thumbs Also See for SRW224P - 10/100 - Gigabit Switch:
Table of Contents

Advertisement

Wireless-G Access Point with Power Over Ethernet and Rangebooster

The Wireless - Wireless Connection Control Tab

This screen allows you to configure the Connection Control List to either permit or block specific wireless client
devices connecting to (associating with) the Access Point.
Wireless Connection Control
Select SSID. Select the SSID of the wireless network that you want to use wireless connection control on.
Enabled/Disabled. Enable or disable wireless connection control. The default is disabled.
Connection Control
Allow only following MAC addresses to connect to wireless network. When this option is selected, only
devices with a MAC address specified in the Connection Control List can connect to the Access Point.
Prevent following MAC addresses from connecting to wireless network. When this option is selected,
devices with a MAC address specified in the Connection Control List will not be allowed to connect to the Access

Figure 6-13: Wireless - Wireless Connection Control

Point.
Wireless Client List
Instead of manually entering the MAC addresses of each client, the Access Point provides a convenient way to
select a specific client device from the client association table. Click this button and a window appears to let you
select a MAC address from the table. The selected MAC address will be entered into the Connection Control List.
Connection Control List
MAC 01-16. Enter the MAC addresses of the wireless client devices you want to control.
Change these settings as described here and click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. Help information is available on the right side of the screen.

Figure 6-14: Select MAC Address from Wireless Client List

24
Chapter 6: Configuring the Wireless-G Access Point
The Wireless - Wireless Connection Control Tab

Advertisement

Table of Contents
loading

Table of Contents