Figure 6-19: Wireless Bridge Mode - Linksys SRW224P - 10/100 - Gigabit Switch User Manual

Wireless-G Access Point with Power Over Ethernet and Rangebooster
Wireless Bridge. This mode connects physically separated wired networks using multiple access points.
Wireless clients will not be able to connect to the access point in this mode. Enter the MAC address(es) of the
access point(s) that will bridge to this access point.
IMPORTANT: In Wireless Bridge mode, the Access Point can ONLY be accessed by another access
point set to Wireless Bridge mode. In order for your other wireless devices to connect to the
Access Point, you must reset it to Access Point mode. The two modes are mutually exclusive.
Switch
Wired LAN
Switch
Wired LAN
Chapter 6: Configuring the Wireless-G Access Point
The AP Mode Tab
Access Point
(Wireless
Bridge Mode)
Access Point
(Wireless
Bridge Mode)

Figure 6-19: Wireless Bridge Mode

Access Point Switch
(Wireless
Bridge Mode)
WAP200 (Wireless Bridge mode)
Access Point Switch
(Wireless
Bridge Mode)
Wired LAN
Wired LAN
30