You can configure the connection by searching the device in the network, or entering the IP
address of the device manually.
P.59 "Configuring the Connection by Local Discovery"
P.62 "Configuring the Connection by Manual Selection"
After configuring the connection to the device, the address book data of the device is obtained in
the public address book. You can display the address book data and copy them in the private
address book.
For the instruction to download the public address book data into the Address Book Viewer,
please refer to the following section:
P.64 "Downloading the Public Address Book"
The address book in this equipment cannot be acquired using Address Book Viewer with the
USB connected.
In the address book data, when the number of the addresses registered in the equipment
exceeds 400 or when the total number of the data registered in each group exceeds 200, to
download address book data into Address Book Viewer, the FTP Server option that can be
set in the Network settings of TopAccess must be enabled.
— Configuring the Connection by Local Discovery
You can search the device in your network and configure the connection.
Discovering the device
1
Click the [Tools] menu and select [Device Setting].
The Document Monitor Local Discovery dialog box appears.
Managing Address Book
59