Oki CX1145MFP Fax Manual page 80

Second Fax — Enter the 2nd fax number of the contact. You can enter up to 128
characters includes numbers and the following symbols: +, -, [space], *, #
To add a 3 second pause to a fax telephone number, place a hyphen (-) at the desired
point in the number.
E-mail Address — Enter the e-mail address of the contact. You can enter up to 192
characters.
Notes — Enter any notes for the contact. You can enter up to 256 characters.
You must enter either "First Name" or "Last Name", and either "Fax" or "E-mail Address".
4
In the Sending Options tab, enter items as described below as
required.
Use Sub Address and sender information — Check this to enable subaddress
transmission for this contact. When this is checked, documents will be always sent using
the specified sub address and SID. Also you can use this contact to perform polling
transmission from the mailbox in the remote facsimile using the specified sub address
and password.
Sub Address — Enter the sub address or mailbox number of remote facsimile where a
document will be sent. This can be entered only when "Use Sub Address and sender
information" is enabled.
Sender Identification — Enter the security password for the sub address if required.
This can be entered only when "Use Sub Address and sender information" is enabled.
Other items in this tab cannot be modified.
5
Click [OK].
The contact is added to the list in the selected folder.
Managing Address Book 79