Installing The N/W-Fax Driver And Address Book Viewer - Oki CX1145MFP Fax Manual

Installing the N/W-Fax Driver and Address Book Viewer

You can install the N/W-Fax driver and Address Book Viewer from the Drivers & Network Utilities
CD-ROM or TopAccess.
This section describes the installation of the N/W-Fax driver and Address Book Viewer in an
SMB environment. The N/W-Fax driver can be set up using the same connection as a printer
driver such as Parallel printing*, USB printing, LPR printing, IPP printing, and Novell printing. To
set up the N/W-Fax driver using these connections, please refer to the Printing Guide.
* AddressBook Viewer cannot obtain the address book data if it is connected via a parallel* or USB port.
Installing from Drivers & Network Utilities CD-ROM
This section describes how to install the fax client software in an SMB environment which is
available for a local area network using TCP/IP.
To set up the N/W-Fax driver in other connections, please refer to the Printing Guide.
Before installing the printer driver in an SMB environment, confirm the following:
- This equipment is connected to the network and turned on.
- The TCP/IP setting is correct on this equipment and your computer.
Installing the fax client software for SMB printing using the installer
The following describes an installation on Windows XP. The procedure is the same when other
versions of Windows are used.
You must log into Windows as a user who has the "Administrators" or "Power Users" privi-
lege. You must log into Windows as a user who has the "Administrators" privilege when
using Windows XP/Vista/Server 2003.
Only users with the administrator privilege can perform this on Windows Vista.For users
without the administrator privilege, installation on Windows Vista is possible by performing
the following procedure and having the administrator privilege temporarily.
- Select "Open folder to view files" in the AutoPlay menu and click [OK].
- Open the Setup folder, click "SetupLauncher.exe" and then select "Run as administrator".
- Enter the administrator's password of the client computer to operate with an administra-
tor's privilege and click [OK].
1
Insert the Drivers & Network Utilities CD-ROM into the CD-ROM
drive.
If the installer does not automatically start, use the Explorer to open the Setup folder
in the Drivers & Network Utilities CD-ROM and double-click "SetupLauncher.exe."
Installing Network Fax Software 11