Cannot Print This Paper Size Select The Other Drawer - Oki CX1145 MFP Operator's Manual For Basic Function
Cx1145 mfp operator manual for basic functions
Hide thumbs
Also See for CX1145 MFP:
- Printing manual (371 pages) ,
- Admin manual (323 pages) ,
- User functions manual (238 pages)
Table of Contents
Advertisement
11. "Cannot print this paper size Select the other drawer"
When the finisher is installed, 12" x 18" FULL paper cannot exit to the receiving tray.
When this message appears, delete the print job, change the paper size you set for printing or specify the
finisher as an exit tray, and try again.
Printing can be performed without deleting the print job in the following two ways. However, some parts of
the original image may be missing because the paper size smaller than 12" x 18" FULL will be used in both
cases.
•
Select a drawer button to be set as a paper source on the touch panel, and press the [START] button.
•
Place paper other than 12" x 18" FULL size on the bypass tray and press the [START] button.
Be sure to specify the paper size.
10
319
10.WHEN THIS MESSAGE APPEARS
Advertisement
Table of Contents
