Oki CX1145 MFP Operator's Manual For Basic Function page 287

5.Jam Symbols (Cont.)
Releasing a paper misfeed in the Finisher and the Hole Punch Unit
(optional: MJ-1024/1023, MJ-6004)
Hold up the guide and remove any mis-
1
fed paper in the paper exit area.
• When the Hole Punch Unit (optional: MJ-6004) is installed, pro-
ceed to step 2. If not installed, proceed to step 6.
2 Open the front cover of the Hole Punch
Unit.
3 Turn the green knob to locate the triangle
9
mark within the area indicated on the
label.
• Under this condition, the punchers are up.
4 Raise the Hole Punch Unit, and remove
any misfed paper.
287
9.BLINKING GRAPHIC SYMBOLS