Oki CX1145 MFP Operator's Manual For Basic Function page 65

3.Bypass Copying (Cont.)
Recalling dimensions registered in the memory
Press the desired memory number button from [MEMORY 1] to [MEMORY 4] to recall the dimension
data registered previously, and then press the [ENTER] button.
2
• Paper size that can be set is as follows:
Length:
Width:
• To register the dimension data in the memory, see ! P.65 "Registering non-standard size in the memory".
• Set other copy modes as required.
5 Press the [START] button on the control panel.
Registering non-standard size in the memory
Follow steps 1 to 3 on "Bypass copying on non-standard size paper"
1
(! P.63).
Press the memory number button (from [MEMORY 1] to [MEMORY 4])
2
you want to register the dimension.
65
2.HOW TO MAKE COPIES
100 mm (3.94") to 297 mm (11.69")
148 mm (5.83") to 432 mm (17.01")