Drawer For Special Uses - Oki CX1145 MFP Operator's Manual For Basic Function

Drawer for special uses

When you set paper for special uses other than normal copying (e.g. sheets for cover copying) in the
drawer, you need to set this drawer for the special use in advance. If the drawer has been set for a special
use, its indication will change on the touch panel. A drawer with this setting will not be used for normal
copying.
The following paper types are selectable according to each purpose.
Paper type
Cover sheet Sheet used in the cover copying mode
Insertion Sheet used in the sheet insertion mode
sheet (Up to 2 drawers can be set for this mode.
First, set Insert source 1, then press the
drawer for the paper type of Insert source 2,
and then press the [INSERT] button.)
* Fax paper (Fax Unit (optional) is required for
FAX paper
the Fax function.)
Special paper Special types of paper
(e.g. Paper with a watermark)
Thick 1 Sheet used when its weight is between 21 lb.
and 28 lb. Bond. It can be set with other paper
types.
* Lists are printed from a drawer for which FAX paper was set. For printing lists, see the User Functions
Guide.
Setting the drawer for special uses
1 Place paper in the drawer(s).
• Place paper with its copy side up.
• Set the paper size as required. (! P.36 "Changing the setting of paper size")
Press the [USER FUNCTIONS] button on
2
the control panel.
Purpose Indication Reference
! P.145 "9.COVER
"COVER"
SHEET"
! P.148 "10.SHEET
"INSERT 1"
(or "INSERT 2")
INSERTION"
F (See the manual of
each option.)
! P.30 "Acceptable
copy paper"
1
-
38