MSI NF980-G65 - Motherboard - ATX User Manual page 99

▍ ▍
NVIDIA RAID NVIDIA RAID
Completng the RAID BIOS Setup
1. After assgnng your RAID array dsks, press F7. The Clear dsk data prompt ap-
pears.
2. Press Y f you want to wpe out all the data from the RAID array, otherwse press
N. You must choose Yes f the drves were prevously used as RAID drves. The
Array Lst wndow appears, where you can revew the RAID arrays that you have
set up.
3. Use the arrow keys to select the array that you want to set up, then press Enter. The
Array Detal wndow appears.
4. The Array Detal screen shows varous nformaton about the array that you se-
lected, such as Strpe Block, RAID Mode, Strpe Wdth, Dsk Model Name, and dsk
capacty.
5. Press Enter agan to go back to the prevous wndow and then press F10 to ext the
RAID setup. Now that the RAID setup has been configured from the RAID BIOS, the
next step s to configure and load NVRAID drvers under Wndows, as explaned n
"Installng the NVIDIA MedaSheld Software Under Wndows" on B-8.
B-6