MSI NF750-G55 - Motherboard - ATX User Manual
  1. Manuals
  2. Brands
  3. MSI Manuals
  4. Motherboard
  5. NF750-G55 - Motherboard - ATX
  6. User manual

MSI NF750-G55 - Motherboard - ATX User Manual

Ms-7578 (v1.x) mainboard
Hide thumbs Also See for NF750-G55 - Motherboard - ATX:
Table of Contents

Advertisement

Quick Links

See also: User Manual
NF750-G55 seres
MS-7578 (v1.x) Manboard

G52-75781X1

Advertisement

Table of Contents
loading

Related Manuals for MSI NF750-G55 - Motherboard - ATX

Summary of Contents for MSI NF750-G55 - Motherboard - ATX

  • Page 1 NF750-G55 seres MS-7578 (v1.x) Manboard G52-75781X1...
  • Page 2 Alternatvely, please try the followng help resources for further gudance. ◙ Vst the MSI webste for FAQ, techncal gude, BIOS updates, drver updates, and other nformaton: http://www.ms.com/ndex.php?func=servce ◙ Contact our techncal staff at: http://ocss.ms.com...

  • Page 3: Safety InstructOns

    MS-7578 Safety Instructons ￭ Always read the safety nstructons carefully. ￭ Keep ths User’s Manual for future reference. ￭ Keep ths equpment away from humdty. ￭ Lay ths equpment on a relable flat surface before settng t up. ￭ The openngs on the enclosure are for ar convecton hence protects the equpment from overheatng.

  • Page 4: Fcc-B RadO Frequency Interference Statement

    ▍ Preface FCC-B Rado Frequency Interference Statement Ths equpment has been tested and found to comply wth the lmts for a Class B dg- tal devce, pursuant to Part 15 of the FCC Rules. These lmts are desgned to provde reasonable protecton aganst harmful nter- ference n a resdental nstallaton.

  • Page 5: Weee (Waste ElectrCal And ElectronC EquPment) Statement

    MSI wll comply wth the product take back requrements at the end of lfe of MSI-branded products that are sold nto the EU.
  • Page 6 MSI će poštovat zahtev o preuzmanju ovakvh prozvoda kojma je stekao vek trajanja, koj maju MSI oznaku  koj su prodat u EU. Ove proz- vode možete vratt na lokalnm mestma za prkupljanje.
  • Page 7  produttor d dett materal saranno obblgat a rtrare ogn prodotto alla fine del suo cclo d vta. MSI s adeguerà a tale Drettva rtrando tutt  prodott marchat MSI che sono stat vendut all’nterno dell’Unone Europea alla fine del loro...

  • Page 8: Table Of Contents

    ▍ Preface ▍ Contents Copyrght Notce ....................  Trademarks .................... Revson Hstory.....................  Techncal Support.................. Safety Instructons .................. FCC-B Rado Frequency Interference Statement.......... v WEEE (Waste Electrcal and Electronc Equpment) Statement ....v Chapter 1 Gettng Started................1-1 Manboard Specficatons ..................1-2 Manboard Layout ....................
  • Page 9 MS-7578 Load Fal-Safe/ Optmzed Defaults ..............3-27 Appendx A Realtek Audo ................A-1 Installng the Realtek HD Audo Drver ..............A-2 Software Configuraton ..................A-4 Hardware Setup ....................A-19 Appendx B NVIDIA RAID................B-1 Introducton ......................B-2 RAID Configuraton ....................B-3 Installng Drver ....................B-7 NVIDIA RAID Utlty Installaton ................B-8 Usng the NVMedaSheld Software ..............B-11 Appendx C Overclockng Center ...............

  • Page 11: Chapter 1 GettNg Started

    Chapter 1 Gettng Started Thank you for choosng the NF750-G55 Seres (MS-7578 v1.X) ATX manboard. The NF750-G55 Seres man- boards are based on NVIDIA nForce 750a SLI sngle ® chpset for optmal system efficency. Desgned to fit the advanced AMD processor n AM3 package processor, ®...
  • Page 12 ▍ Gettng Started ▍ Gettng Started ainboard pecificationS Processor Support ■ Supports AMD Phenom II/ Athlon II/ Sempron processors n the AM3 package ® (For the latest nformaton about CPU, please vst http://www.ms.com/ndex.php?func=cpuform2) Hyper Transport ■ Supports Hyper Transport(HT) 3.0 Technology Chpset ■...
  • Page 13 MS-7578 MS-7578 1 DVI-D port 1 HDMI port 1 eSATA port 1 LAN jack 6 USB 2.0 ports 6 flexble audo jacks ■ On-Board Connectors 3 USB 2.0 connectors 1 SPDIF-Out connector 1 Front Panel Audo connector 1 CD-In connector 1 TPM connector 1 Chasss Intruson Swtch connector 1 Seral port connector...

  • Page 14: MaNboard Layout

    ▍ Gettng Started ▍ Gettng Started ainboard ayout Top : mouse Bottom:keyboard JPWR2 Top: VGA port Bottom:DVI port Top: USB ports Bottom:HDMI USB ports eSATA port Top: LAN Jack Bottom: USB ports Line-In Line-Out T:RS-Out M:CS-Out B:SS-Out EZ_OC_SWITCH1 NVIDIA SYSFAN1 nForce 750a SLI PCI_E1 JBAT1...
  • Page 15 MS-7578 MS-7578 acking heckLiSt MSI Drver/Utlty DVD MSI manboard SATA Cable (Optonal) Standard Cable for USB Bracket (Optonal) Power Cable IDE Devces User’s Gude Back IO Sheld * The pctures are for reference only and may vary from the packng contents of the product you purchased.

  • Page 17: Chapter 2 Hardware Setup

    Chapter 2 Hardware Setup Ths chapter provdes you wth the nformaton about hardware setup procedures. Whle dong the nstalla- ton, be careful n holdng the components and follow the nstallaton procedures. For some components, f you nstall n the wrong orentaton, the components wll not work properly.
  • Page 18 ▍ Hardware Setup ▍ Hardware Setup uick oMponentS uide CPUFAN, p.2-13 DDR3, p.2-6 JPWR2, p.2-8 CPU, p.2-3 Back Panel, JPWR1, p.2-8 p.2-9 IDE1, p.2-11 EZ_OC_SWITCH1, SYSFAN2, p.2-13 p.2-17 JBAT1, p.2-18 SYSFAN1, p.2-13 SATA1~5, p.2-12 PCIE, p.2-20 JTPM1, p.2-15 JFP2, p.2-12 SYSFAN3, p.2-13 JCI1, p.2-13 PCI, p.2-20...

  • Page 19: Cpu (Central ProcessNg UnT)

    MS-7578 MS-7578 cpu (c entraL roceSSing When you are nstallng the CPU, make sure to nstall the cooler to prevent overheatng. If you do not have the CPU cooler, consult your dealer before turnng on the computer. For the latest nformaton about CPU, please vst http://www.ms.com/ndex. php?func=cpuform2 Important Overheatng...
  • Page 20 ▍ Hardware Setup ▍ Hardware Setup CPU & Cooler Installaton When you are nstallng the CPU, make sure the CPU has a cooler attached on the top to prevent overheatng. Meanwhle, do not forget to apply some thermal paste on CPU before nstallng the heat snk/cooler fan for better heat dsperson.
  • Page 21 MS-7578 MS-7578 Poston the coolng set onto the Then press down the other end of the retenton mechansm. clp to fasten the coolng set on the Hook one end of the clp to hook top of the retenton mechansm. first. Locate the Fx Lever and lft up t .

  • Page 22: Memory

    ▍ Hardware Setup ▍ Hardware Setup eMory These DIMM slots are used for nstallng memory modules. For more nformaton on compatble components, please vst http://www.ms.com/ndex.php?func=testreport DDR3 240-pn, 1.5V 48x2=96 pn 72x2=144 pn Dual-Channel mode Populaton Rule In Dual-Channel mode, the memory modules can transmt and receve data wth two data bus lnes smultaneously.
  • Page 23 MS-7578 MS-7578 Installng Memory Modules The memory module has only one notch on the center and wll only fit n the rght orentaton. Insert the memory module vertcally nto the DIMM slot. Then push t n untl the golden finger on the memory module s deeply nserted n the DIMM slot. The plastc clp at each sde of the DIMM slot wll automatcally close when the memory module s properly seated.

  • Page 24: Power Supply

    ▍ Hardware Setup ▍ Hardware Setup ower uppLy ATX 24-pn Power Connector: JPWR1 Ths connector allows you to connect an ATX 24-pn power supply. To connect the ATX 24-pn power supply, make sure the plug of the power supply s nserted n the proper orentaton and the pns are algned.

  • Page 25: Back Panel

    MS-7578 MS-7578 aneL Mouse USB Ports VGA Port USB Ports Lne-In RS-Out Lne-Out CS-Out Keyboard DVI-D Port HDMI Port eSATA Port SS-Out USB Ports ▶ Mouse/Keyboard The standard PS/2 mouse/keyboard DIN connector s for a PS/2 mouse/keyboard. ® ® ▶ VGA Port The DB15-pn female connector s provded for montor.
  • Page 26 ▍ Hardware Setup ▍ Hardware Setup ▶ Audo Ports These audo connectors are used for audo devces. It s easy to dfferentate between audo effects accordng to the color of audo jacks. ■ Lne-In (Blue) - Lne In, s used for external CD player, tape-player or other audo devces.

  • Page 27: Floppy Disk Drive Connector: Fdd1

    MS-7578 MS-7578 onnectorS Floppy Dsk Drve Connector: FDD1 Ths connector supports 360KB, 720KB, 1.2MB, 1.44MB or 2.88MB floppy dsk drve. ct or F l op 5 1/ 4" C on ne D r i ve D i sk nne cto r i ve Co i sk D py D...
  • Page 28 ▍ Hardware Setup ▍ Hardware Setup Seral ATA Connector: SATA1~5 Ths connector s a hgh-speed Seral ATA nterface port. Each connector can connect to one Seral ATA devce. Important • Please do not fold the Seral ATA cable nto 90-degree angle. Otherwse, data loss may occur durng transmsson.
  • Page 29 MS-7578 MS-7578 Fan Power Connectors: CPUFAN, SYSFAN1, SYSFAN2/3 The fan power connectors support system coolng fan wth +12V. When connectng the wre to the connectors, always note that the red wre s the postve and should be con- nected to the +12V; the black wre s Ground and should be connected to GND. If the manboard has a System Hardware Montor chpset on-board, you must use a specally desgned fan wth speed sensor to take advantage of the CPU fan control.
  • Page 30 ▍ Hardware Setup ▍ Hardware Setup Front USB Connector: JUSB1/ JUSB2/ JUSB3 Ths connector, complant wth Intel I/O Connectvty Desgn Gude, s deal for con- ® nectng hgh-speed USB nterface perpherals such as USB HDD, dgtal cameras, MP3 players, prnters, modems and the lke. USB 2.0 Bracket (optonal) Important Note that the pns of VCC and GND must be connected correctly to avod possble...
  • Page 31 MS-7578 MS-7578 S/PDIF-Out Connector: JSP1 Ths connector s used to connect S/PDIF (Sony & Phlps Dgtal Interconnect Format) nterface for dgtal audo transmsson. S/PDIF Bracket (Optonal) TPM Module connector: JTPM1 Ths connector connects to a TPM (Trusted Platform Module) module (optonal). Please refer to the TPM securty platform manual for more detals and usages.
  • Page 32 ▍ Hardware Setup ▍ Hardware Setup Seral Port Connector: JCOM1 Ths connector s a 16550A hgh speed communcaton port that sends/receves 16 bytes FIFOs. You can attach a seral devce. 2-16...

  • Page 33: SwTch

    MS-7578 MS-7578 witch Overclock FSB Swtch: EZ_OC_SWITCH1 You can overclock the FSB to ncrease the processor frequency by changng the swtch. Follow the nstructons below to set the FSB. Default Increase 10% Increase 15% Increase 20% speed of FSB speed of FSB speed of FSB Important •...

  • Page 34: Jumpers

    ▍ Hardware Setup ▍ Hardware Setup uMperS Clear CMOS Jumper: JBAT1 There s a CMOS RAM onboard that has a power supply from an external battery to keep the data of system configuraton. Wth the CMOS RAM, the system can automat- cally boot OS every tme t s turned on.

  • Page 35: Button

    MS-7578 MS-7578 utton The motherboard provdes the followng button for you to set the computer’s functon. Ths secton wll explan how to change your motherboard’s functon through the use of button. Power Button: POWER1 Ths power button s used to turn-on or turn-off the system. Press the button to turn-on or turn-off the system.

  • Page 36: Slots

    ▍ Hardware Setup ▍ Hardware Setup LotS PCI (Perpheral Component Interconnect) Express Slot The PCI Express slot supports the PCI Express nterface expanson card. PCI Express x16 Slot PCI Express x1 Slot PCI (Perpheral Component Interconnect) Slot The PCI slot supports LAN card, SCSI card, USB card, and other add-on cards that comply wth PCI specficatons.

  • Page 37: Nvidia Sli Technology

    MS-7578 MS-7578 NVIDIA SLI Technology ® NVIDIA SLI (Scalable Lnk Interface) technology allows two GPUs to run n tandem ® wthn a system to acheve up to twce the performance of a sngle graphcs card. To utlze ths technology, the two GPU cards must be connected by an SLI Vdeo Lnk card.
  • Page 38 ▍ Hardware Setup ▍ Hardware Setup After the hardware nstallaton s completed, restart the system and nstall the NV SLI drver/utlty. A configuraton panel wll be provded for Mult-GPU control. Check the Enable mult-GPU box to enable the SLI functon for the onboard graphcs cards (concernng the detals of mult-GPU settngs, please refer to your graphcs card manual).
  • Page 39 MS-7578 MS-7578 NVIDIA Hybrd SLI Technology ® Hybrd SLI technology, based on NVIDIA ’s ndustry-leadng SLI technology, delvers ® mult-GPU benefits when an NVIDIA manboard GPU s combned wth an NVIDIA ® ® dscrete GPU. Enablng Hybrd SLI Technology Power off the system and nstall the NVIDIA SLI graphc card that supports Hybrd SLI ®...

  • Page 40: Led Status IndCators

    ▍ Hardware Setup Led S tatuS ndicatorS APS LEDs APS LEDs These APS (Actve Phase Swtchng) LEDs ndcate the current CPU power phase mode. Follow the nstructons below to read. : ON, : OFF 4 of the LEDs wll lght blue when CPU s n 4 phase power mode. 1 of the LEDs wll lght blue when CPU s n 1 phase power mode.

  • Page 41: Chapter 3 Bios Setup

    Chapter 3 BIOS Setup Ths chapter provdes nformaton on the BIOS Setup program and allows you to configure the system for op- tmum use. You may need to run the Setup program when: ■ An error message appears on the screen durng the system bootng up, and requests you to run SETUP.

  • Page 42: EnterNg Setup

    ▍ ▍ BIOS Setup BIOS Setup ntering etup Power on the computer and the system wll start POST (Power On Self Test) process. When the message below appears on the screen, press <DEL> key to enter Setup. Press DEL to enter SETUP If the message dsappears before you respond and you stll wsh to enter Setup, restart the system by turnng t OFF and On or pressng the RESET button.
  • Page 43 MS-7578 MS-7578 Control Keys <↑> Move to the prevous tem <↓> Move to the next tem <←> Move to the tem n the left hand <→> Move to the tem n the rght hand <Enter> Select the tem <Esc> Jumps to the Ext menu or returns to the man menu from a submenu <+/PU>...

  • Page 44: The MaN Menu

    ▍ ▍ BIOS Setup BIOS Setup ▶ Standard CMOS Features Use ths menu for basc system configuratons, such as tme, date etc. ▶ Advanced BIOS Features Use ths menu to setup the tems of the BIOS specal enhanced features. ▶ Integrated Perpherals Use ths menu to specfy your settngs for ntegrated perpherals.
  • Page 45 MS-7578 MS-7578 ▶ Load Fal-Safe Defaults Use ths menu to load the default values set by the BIOS vendor for stable system performance. ▶ Load Optmzed Defaults Use ths menu to load the default values set by the manboard manufacturer specfically for optmal performance of the manboard.

  • Page 46: Standard Cmos Features

    ▍ ▍ BIOS Setup BIOS Setup cMoS f tandard eatureS The tems n Standard CMOS Features Menu nclude some basc setup tems. Use the arrow keys to hghlght the tem and then use the <PgUp> or <PgDn> keys to select the value you want n each tem.
  • Page 47 MS-7578 MS-7578 ▶ IDE Prmary Master/ Slave, AHCI Port 1~5 (SATA1~4) & E-SATA Press <Enter> to enter the sub-menu, and the followng screen appears. ▶ Devce / Vendor / Sze It wll show the devce nformaton that you connected to the SATA connector. ▶...
  • Page 48 ▍ ▍ BIOS Setup BIOS Setup ▶ Halt On The settng determnes whether the system wll stop f an error s detected at boot. When the system stops for the errors preset, t wll halt on for 15 seconds and then automatcally resume ts operaton.

  • Page 49: Advanced Bios Features

    MS-7578 MS-7578 bioS f dvanced eatureS ▶ BIOS Flash Protecton Ths functon protects the BIOS from accdental corrupton by unauthorzed users or computer vruses. When enabled, the BIOS?data cannot be changed when attemptng to update the BIOS wth a Flash utlty. To successfully update the BIOS, you wll need to dsable ths Flash BIOS Protecton functon.
  • Page 50 ▍ ▍ BIOS Setup BIOS Setup ▶ MPS Table Verson Ths field allows you to select whch MPS (Mult-Processor Specficaton) verson to be used for the operatng system. You need to select the MPS verson supported by your operatng system. To find out whch verson to use, consult the vendor of your operatng system.
  • Page 51 MS-7578 MS-7578 ▶ Boot Sequence Press <Enter> to enter the sub-menu and the followng screen appears: ▶ --- Boot Devce These tems allow you to arrange the order that the BIOS uses to look for a boot devce from whch to load the operatng system durng the boot process. ▶...

  • Page 52: Integrated PerPherals

    ▍ ▍ BIOS Setup BIOS Setup ntegrated eripheraLS ▶ USB Controller Ths settng allows you to enable/dsable the onboard USB 1.1/ 2.0 controller. ▶ USB Devce Legacy Support Select [Enabled] f you need to use a USB-nterfaced devce n the operatng system. ▶...
  • Page 53 MS-7578 MS-7578 ▶ PCI IDE BusMaster Ths tem allows you to enable/ dsable BIOS to used PCI busmasterng for readng/ wrtng to IDE drves. ▶ OnChp SATA Controller Ths tem allows users to enable or dsable the SATA controller. ▶ RAID Mode Ths tem s used to select mode for SATA connectors.

  • Page 54: Power Management Setup

    ▍ ▍ BIOS Setup BIOS Setup ower anageMent etup Important S3-related functons descrbed n ths secton are avalable only when the BIOS sup- ports S3 sleep mode. ▶ ACPI Functon Ths tem s to actvate the ACPI (Advanced Configuraton and Power Management Interface) Functon.
  • Page 55 MS-7578 MS-7578 ▶ Power Button Functon Ths feature sets the functon of the power button. Settngs are: [Power Off] The power button functons as normal power off button. [Suspend] When you press the power button, the computer enters suspend/ sleep mode, but f the button s pressed for more than four seconds, the computer s turned off.

  • Page 56: H/W MonTor

    ▍ ▍ BIOS Setup BIOS Setup h/w M onitor ▶ Chasss Intruson The field enables or dsables the feature of recordng the chasss ntruson status and ssung a warnng message f the chasss s once opened. To clear the warnng mes- sage, set the field to [Reset].

  • Page 57: Green Power

    MS-7578 MS-7578 reen ower ▶ CPU LED Phase Control Ths tem allows you to select the amount of CPU phase control that you want to use. Once ths tem s enabled, the hardware wll auto adjust the CPU power phase accord- ng to the loadng of CPU to reach the best power savng functon.

  • Page 58: Bios SettNg Password

    ▍ ▍ BIOS Setup BIOS Setup bioS S etting aSSword When you select ths functon, a message as below wll appear on the screen: Type the password, up to sx characters n length, and press <Enter>. The password typed now wll replace any prevously set password from CMOS memory. You wll be prompted to confirm the password.

  • Page 59: Cell Menu

    MS-7578 MS-7578 Important Change these settngs only f you are famlar wth the chpset. ▶ Current CPU / DRAM Frequency These tems show the current clocks of CPU and Memory speed. Read-only. ▶ AMD Cool’n’Quet The Cool’n’Quet technology can effectvely and dynamcally lower CPU speed and power consumpton.
  • Page 60 ▍ ▍ BIOS Setup BIOS Setup Enter Power Optons Propertes tag, and select Mnmal Power Management under Power schemes, as shown below. ▶ CPU Specficatons Press <Enter> to enter the sub-menu and the followng screen appears. Ths submenu shows the nformaton of nstalled CPU. ▶...
  • Page 61 MS-7578 MS-7578 ▶ NVIDIA Core Calbraton Ths tem s for overclock. Settng to [Enabled] allows you to set the CPU Rato hgher. It s avalable only when the processor supports ths functon. ▶ Memory-Z Press <Enter> to enter the sub-menu and the followng screen appears. ▶...
  • Page 62 ▍ ▍ BIOS Setup BIOS Setup ▶ DRAM Tmng Mode Ths field has the capacty to automatcally detect all of the DRAM tmng. If you set ths field to [DCT 0], [DCT 1] or [Both], some fields wll appear and selectable. DCT 0 controls channel A and DCT1 controls channel B.
  • Page 63 MS-7578 MS-7578 Ths consttutes the mnmum number of clock cycles that must occur between the last vald wrte operaton and the next read command to the same nternal bank of the DDR devce. ▶ tRFC0~3 When the DRAM Tmng Mode sets to [DCT 0], [DCT1] or [Both], these fields are adjustable.
  • Page 64 ▍ ▍ BIOS Setup BIOS Setup Important • If you do not have any EMI problem, leave the settng at [Dsabled] for optmal system stablty and performance. But f you are plagued by EMI, select the value of Spread Spectrum for EMI reducton. •...
  • Page 65 MS-7578 MS-7578 ettingS ▶ Save Settngs 1/ 2/ 3/ 4 These tems are used to save the settngs set by yourself to CMOS. ▶ Load Settngs 1/ 2/ 3/ 4 These tems are avalable after you save your settngs n Save Settngs 1/ 2/ 3/ 4 tems , and are used to load the settngs from CMOS.
  • Page 66 ▍ ▍ BIOS Setup BIOS Setup Important Faled Overclockng Resoluton Ths motherboard supports overclockng greatly. However, please make sure your perpherals and components are bearable for some specal settngs. Any operaton that exceeds product specficaton s not recommended. Any rsk or damge resultng from mproper operaton wll not be under our product warranty.

  • Page 67: Load FaL-Safe/ OptMZed Defaults

    MS-7578 MS-7578 ptiMized efauLtS The two optons on the man menu allow users to restore all of the BIOS settngs to the default Fal-Safe or Optmzed values. The Optmzed Defaults are the default values set by the manboard manufacturer specfically for optmal performance of the manboard. The Fal-Safe Defaults are the default values set by the BIOS vendor for stable system performance.

  • Page 69: AppendX A Realtek AudO

    Appendx A Realtek Audo The Realtek audo provdes 10-channel DAC that smul- taneously supports 7.1 sound playback and 2 channels of ndependent stereo sound output (multple streamng) through the Front-Out-Left and Front-Out-Rght chan- nels. A-A-1...
  • Page 70 ▍ Realtek Audo hd a nStaLLing the eaLtek udio river You need to nstall the HD audo drver for Realtek audo codec to functon properly before you can get access to 2-, 4-, 6-, 8- channel or 7.1+2 channel audo operatons. Follow the procedures descrbed below to nstall the drvers for dfferent operatng sys- tems.
  • Page 71 MS-7578 Clck Next to nstall the Realtek Hgh Definton Audo Drver. Clck here Clck Fnsh to restart the system. Select ths opton Clck here...

  • Page 72: Software ConfiguratOn

    ▍ Realtek Audo oftware onfiguration After nstallng the audo drver, you are able to use the 2-, 4-, 6- or 8- channel audo feature now. Clck the audo con from the system tray at the lower-rght corner of the screen to actvate the HD Audo Configuraton. It s also avalable to enable the audo drver by clckng the Realtek HD Audo Manager from the Control Panel.

  • Page 73: Sound Effect

    MS-7578 Sound Effect Here you can select a sound effect you lke from the Envronment lst. Envronment Smulaton You wll be able to enjoy dfferent sound experence by pullng down the arrow, totally 23 knds of sound effect wll be shown for selecton. Realtek HD Audo Sound Manager also provdes five popular settngs “Stone Corrdor”, “Bathroom”, “Sewer ppe”, “Arena”...
  • Page 74 ▍ Realtek Audo Equalzer Selecton Equalzer frees users from default settngs; users may create ther owned preferred settngs by utlzng ths tool. 10 bands of equalzer, rangng from 100Hz to 16KHz. Save Reset The settngs are saved perma- 10 bands of equalzer would go nently for future use back to the default settng Enable / Dsable...
  • Page 75 MS-7578 Frequently Used Equalzer Settng Realtek recognzes the needs that you mght have. By leveragng our long experence at audo field, Realtek HD Audo Sound Manager provdes you certan optmzed equalzer settngs that are frequently used for your quck enjoyment. [How to Use It] Other than the buttons “Pop”, “Lve”, “Club”...
  • Page 76 ▍ Realtek Audo Mxer In the Mxer part, you may adjust the volumes of the rear and front panels ndvdually. ■ Adjust Volume You can adjust the volume of the speakers that you pluged n front or rear panel by select the Realtek HD Audo rear output or Realtek HD Audo front output tems.
  • Page 77 MS-7578 When you are playng the first audo source (for example: use Wndows Meda Player to play DVD/VCD), the output wll be played from the rear panel, whch s the default settng. Then you must to select the Realtek HD Audo 2nd output from the scroll lst first, and use a dfferent program to play the second audo source (for example: use Wnamp to play MP3 files).

  • Page 78: Playback Control

    ▍ Realtek Audo ■ Playback control Tool Mute Playback devce Ths functon s to let you freely decde whch ports to output the sound. And ths s essental when mult- streamng playback enabled. - Realtek HD Audo Rear Output - Realtek HD Audo Front Output Mute You may choose to mute sngle or multple volume controls or to completely mute sound output.
  • Page 79 MS-7578 ■ Recordng control Recordng devce -Back Lne n/Mc, Front Ln n Tool Mute -Realtek HD Audo Input Mute You may choose to mute sngle or multple volume controls or to completely mute sound nput. Tool - Show the followng volume controls Ths s to let you freely decde whch volume control tems to be dsplayed.
  • Page 80 ▍ Realtek Audo Audo I/O In ths tab, you can easly configure your mult-channel audo functon and speakers. You can choose a desred mult-channel operaton here. ■ Headphone for the common headphone ■ 2CH Speaker for Stereo-Speaker Output ■ 4CH Speaker for 4-Speaker Output ■...
  • Page 81 MS-7578 ■ Connector Settngs Clck to access connector settngs. Dsable front panel jack detecton (optonal) Jack detecton functon only works wth HD audo front panel. Please check f front jacks on your system are so-called AC’97 jacks. If so, please check ths tem to dsable front panel jack detecton.
  • Page 82 ▍ Realtek Audo S/PDIF Short for Sony/Phlps Dgtal Interface, a standard audo file transfer format. S/PDIF al- lows the transfer of dgtal audo sgnals from one devce to another wthout havng to be converted first to an analog format. Mantanng the vablty of a dgtal sgnal prevents the qualty of the sgnal from degradng when t s converted to analog.
  • Page 83 MS-7578 Test Speakers You can select the speaker by clckng t to test ts functonalty. The one you select wll lght up and make testng sound. If any speaker fals to make sound, then check whether the cable s nserted firmly to the connector or replace the bad speakers wth good ones.
  • Page 84 ▍ Realtek Audo Mcrophone In ths tab you may set the functon of the mcrophone. Select the Nose Suppresson to remove the possble nose durng recordng, or select Acoustc Echo Cancellaton to cancel the acoustc echo drung recordng. Acoustc Echo Cancellaton prevents playback sound from beng recorded by mcro- phone together wth your sound.
  • Page 85 MS-7578 3D Audo Demo In ths tab you may adjust your 3D postonal audo before playng 3D audo applcatons lke gamng. You may also select dfferent envronment to choose the most sutable envronment you lke. A-17...
  • Page 86 ▍ Realtek Audo Informaton In ths tab t provdes some nformaton about ths HD Audo Configuraton utlty, nclud- ng Audo Drver Verson, DrectX Verson, Audo Controller & Audo Codec. You may also select the language of ths utlty by choosng from the Language lst. Also there s a selecton Show con n system tray.

  • Page 87: Hardware Setup

    MS-7578 ardware etup Connectng the Speakers When you have set the Mult-Channel Audo Functon mode properly n the software utlty, connect your speakers to the correct phone jacks n accordance wth the settng n software utlty. ■ 2-Channel Mode for Stereo-Speaker Output Lne In Lne Out (Front channels) No functon...
  • Page 88 ▍ Realtek Audo ■ 4-Channel Mode for Stereo-Speaker Output Lne In Lne Out (Front channels) Lne Out (Rear channels) No functon No functon A-20...
  • Page 89 MS-7578 ■ 6-Channel Mode for Stereo-Speaker Output Lne In Lne Out (Front channels) Lne Out (Rear channels) Lne Out (Center and Subwoofer channel) No functon A-21...
  • Page 90 ▍ Realtek Audo ■ 8-Channel Mode for Stereo-Speaker Output Lne In Lne Out (Front channels) Lne Out (Rear channels) Lne Out (Center and Subwoofer channel) Lne Out (Sde channels) Important To enable 7.1 channel audo-out functon on Vsta operatng system, you have to nstall the Realtek Audo Drver.

  • Page 91: AppendX Bnvidia Raid

    Appendx B NVIDIA RAID NVIDIA brngs Redundant Array of Independent Dsks (RAID) technology-whch s used by the world’s leadng busnesses-to the common PC desktop. Ths technology uses multple drves to ether ncrease total dsk space or to offer data protecton. For all levels, RAID tech- nques optmze storage solutons by usng multple dsks grouped together and treatng them as a sngle storage resource.
  • Page 92 ▍ ▍ NVIDIA RAID NVIDIA RAID ntroduction System Requrement Operatng System Support NVRAID supports the followng operatng systems: Wndows XP, Wndows Vsta RAID Arrays NVRAID supports the followng types of RAID arrays descrbed n ths secton: ■ RAID 0: RAID 0 defines a dsk strpng scheme that mproves the dsk read and wrte tmes for many applcatons.
  • Page 93 MS-7578 MS-7578 raid c onfiguration Basc Configuraton Instructons The followng are the basc steps for configurng NVRAID: Non-Bootable RAID Array Choose the hard dsks that are to be RAID enabled n the system BIOS. (Refer the BIOS secton for detals.) Specfy the RAID level, ether Mrrorng (RAID 1), Strpng (RAID 0), Strpng and Mrrorng (RAID 0+1), RAID 5 or JBOD and create the desred RAID array.
  • Page 94 ▍ ▍ NVIDIA RAID NVIDIA RAID Understandng the “Define a New Array” Wndow Use the Define a New Array wndow to ■ Select the RAID Mode ■ Set up the Strpng Block ■ Specfy whch dsks to use for the RAID Array The SATA ports are called channels and they are assocated wth adapters.
  • Page 95 MS-7578 MS-7578 Usng the Define a New Array Wndow If necessary, press the tab key to move from field to field untl the approprate field s hghlghted. ■ Selectng the RAID Mode By default, ths s set to [Mrrorng]. To change to a dfferent RAID mode, press the down arrow key untl the mode that you want appears n the RAID Mode box- ether [Mrrorng], [Strpe], [RAID5], [Spannng], or [Strpe Mrrorng].
  • Page 96 ▍ ▍ NVIDIA RAID NVIDIA RAID Completng the RAID BIOS Setup After assgnng your RAID array dsks, press F7. The Clear dsk data / Clear MBR prompt appears. Press Y to clear the dsk data / MBR. The Array Lst screen appears, where you can revew the RAID arrays that you have set up.
  • Page 97 nto the A: drve,and then press ENTER. Important Please follow the nstructon below to make an “NVIDIA RAID Drver” . Insert the MSI DVD nto the DVD-ROM drve. Clck the “Browse DVD” on the Setup screen. For Wndows XP, copy all the contents n the \\ChpSet\nVda\MCP\XP\IDE\WnXP\satarad to a formatted floppy dsk.
  • Page 98 ▍ ▍ NVIDIA RAID NVIDIA RAID nvidia raid u tiLity nStaLLation Installng the NVIDIA MedaSheld Software Under Wndows (for Non-bootable RAID Array) The exstng Wndows Seral ATA drver must be upgraded to use the NVIDIA Seral ATA drver. Ths secton descrbes how to run the setup applcaton and nstall the RAID software whch wll upgrade the Wndows SATA drver and nstall the RAID software.
  • Page 99 MS-7578 MS-7578 Intalzng and Usng the Dsk Array The RAID array s now ready to be ntalzed under Wndows. Launch Computer Management by clckng “Start” → “Settngs” → “Control Panel” then open the “Admnstratve Tools” folder and double clck on “Computer Manage- ment”.
  • Page 100 ▍ ▍ NVIDIA RAID NVIDIA RAID Check the dsk n the lst f you want to make the array a dynamc dsk, then clck Next. The Completng the Intalze and Convert Dsk Wzard wndow appears. Clck Fnsh. The “Computer Management” wndow appears. The actual dsks lsted wll depend on your system, and the unallocated partton s the total combned storage of two hard dsks.
  • Page 101 MS-7578 MS-7578 Sing the edia hieLd oftware Accessng the Storage Page To access the NVIDIA Control Panel Storage page: Clck Star-> Programs-> NVIDIA Corporaton-> NVIDIA Control Panel-> Storage. The NVIDIA Control Panel - Storage page appears. B-11...

  • Page 102: Create An Array

    ▍ ▍ NVIDIA RAID NVIDIA RAID Usng the Storage Page From the Storage page, you can accomplsh the followng tasks: ■ Create an Array ■ Delete an Array ■ Rebuld an Array ■ Synchronze an Array ■ Desgnate a Spare Dsk ■...
  • Page 103 MS-7578 MS-7578 You can press F1 to access the onlne help that walks you through the Wzard wth step-by-step nstructons. Desgnate a Spare Dsk About Spare Dsks You can desgnate a hard drve to be used as a spare drve for a RAID 1, RAID 0+1 or RAID 5 array.
  • Page 104 ▍ ▍ NVIDIA RAID NVIDIA RAID Remove a Spare The Remove spare opton appears only f you have a a RAID array wth a spare dsk allocated to t. Clck Remove spare to start the Remove Spare Wzard and then follow the nstruc- tons.
  • Page 105 MS-7578 MS-7578 Specfic Mgratng Requrements The followng table lsts the dsk requrements for a new RAID array for varous mgrat- ng combnatons. From New Array Dsk Requrements RAID 0 RAID 0 m > n Number of dsk n the new array must be greater than the orgnal array. RAID 1 m = 2, n = 1 RAID 1 array must nclude two dsks, converted from a one dsk RAID 0 array.
  • Page 106 ▍ ▍ NVIDIA RAID NVIDIA RAID Usng the SMART Dsk Feature S.M.A.R.T. stands for Self‐Montorng, Analyss, and Reportng Technology. It s a dsk drve feature that allows software to montor degradatons n dsk drve specficatons. Usng ths technology, NVIDIA MedaSheld lets you montor the health of dsk drves n a RAID array and alerts you when certan degradatons ndcate an mpendng hard- ware falure, gvng you tme to back up data and replace the drve.
  • Page 107 MS-7578 MS-7578 To vew the SMART status: Clck Vew storage configuraton to open the assocated page. Clck on a dsk from the lst of array dsks. The SMART status, f avalable, appears n the STATUS notes secton. To vew the SMART status event logs: Wndows XP Open the Wndows Control Panel.

  • Page 109: AppendX C OverclockNg Center

    Overclockng Center Overclockng Center, the most useful and powerful utl- ty that MSI has spent much research and efforts to de- velop, helps users to montor or configure the hardware status of MSI Manboard n wndows, such as CPU clock, voltage, fan speed and temperature.
  • Page 110 Once you have your Overclockng Center nstalled (locate the setup source file n the setup CD accompanyng wth your manboard, path: Utlty --> MSI Utlty --> Overclock- ng Center), t wll have a short cut con on the desktop, and a short cut path n your “Start-up”...

  • Page 111: System Info

    MS-7578 ySteM In the System Info screen, you can read the nformaton of motherboard/ PCI. Motherboard Clck Motherboard to read the nformaton of motherboard, BIOS, nstalled CPU and nstalled graphcs card. Important The pctures n ths appendx are for reference only and may vary from the product you purchased.
  • Page 112 ▍ Overclockng Center Clck PCI to read the nformaton of devces on the manboard.

  • Page 113: Dot

    MS-7578 Clck DOT to enter the DOT screen. In DOT, you can select the basc settng to reach optmal performance n Basc menu or you can adjust advanced values for overclockng n Advance menu. Basc In the Basc menu, t provdes one default settng and several common settngs for df- ferent envronments.
  • Page 114 ▍ Overclockng Center Advance In the Advance menu, you can adjust the values for each envronment settng/ default settng. Clck the Coolng/ Slence/ Default/ Game/ Cnema button to enter t’s settng menu. Please refer to the followng descrptons to adjust the values and save them.
  • Page 115 MS-7578 In each settng menu, you can select desred values for manual overclockng. Smply clck the rght sde of the button whch arranges an arrow sgn, and a drop-down menu wll appear below the button, then select a value. Clck the arrow sgn and the drop-down menu wll appear.
  • Page 116 ▍ Overclockng Center After you adjust the values n settng menu, you can save t for future use. Clck the Save button, and enter a name n the empty box. Then, clck Save button agan to save the settngs. Important It provdes you to save up to 20 user settngs.

This manual is also suitable for:

Nf750-g55 series

Table of Contents