MSI NF980-G65 - Motherboard - ATX User Manual page 28

Fan Power Connectors: CPUFAN1, SYSFAN1~3
The fan power connectors support system coolng fan wth +12V. When connectng the
wre to the connectors, always note that the red wre s the postve and should be con-
nected to the +12V; the black wre s Ground and should be connected to GND. If the
manboard has a System Hardware Montor chpset on-board, you must use a specally
desgned fan wth speed sensor to take advantage of the CPU fan control.
CPUFAN1
Important
Please refer to the recommended CPU fans at processor's offical webste or consult
•
the vendors for proper CPU coolng fan.
• CPUFAN1 supports fan control. You can nstall Overclockng Center utlty that wll
automatcally control the CPU fan speed accordng to the actual CPU temperature.
• Fan cooler set wth 3 or 4 pns power connector are both avalable for CPUFAN1.
CD-In Connector: JCD1
Ths connector s provded for external audo nput.
SYSFAN1/ 2
MS-7612 MS-7612
SYSFAN3
2-13