Create An Array; Delete An Array - MSI NF980-G65 - Motherboard - ATX User Manual

▍ ▍
NVIDIA RAID NVIDIA RAID
Usng the Storage Page
From the Storage page, you can accomplsh the followng tasks:
■

Create an Array

■

Delete an Array

■ Rebuld an Array
■ Synchronze an Array
■ Desgnate a Spare Dsk
■ Remove a Spare
■ Mgrate an Array
■ Vew Storage Informaton
Create an Array
Ths opton s avalable only f there are free dsks that are RAID-enabled.
Clck Create array to start the Create Array Wzard and then follow the nstructons.
You can press F1 to access the onlne help that walks you through the Wzard wth
step-by-step nstructons.
Delete an Array
Ths opton s avalable only f RAID arrays have been created.
Clck Delete array to start the Delete Array Wzard and then follow nstructons.
You can press F1 to access the onlne help that walks you through the Wzard wth
step-by-step nstructons.
Rebuld an Array
About Rebuldng
Rebuldng s the process of restorng data to a hard drve from other drves n the array.
For example, f you have a three dsk RAID 5 array and one of the drves fals, you wll
need to replace the faled drve wth a new one, and rebuld the array to re-generate the
lost data on the newly added drve.
Rebuldng apples only to fault-tolerant arrays such as RAID 1, RAID 0+1, or RAID 5
Arrays.
Instructons
Clck Rebuld array to start the Rebuld Create Array Wzard and then follow the nstruc-
tons.
You can press F1 to access the onlne help that walks you through the Wzard wth
step-by-step nstructons.
The rebuldng process takes some tme to complete, and occurs n the background so
as not to affect the performance of the system.
Synchronze an Array
Synchronzng an array wll force a rebuld of redundancy or party. The operaton
apples to any fault-tolerant array such as RAID 1, 0+1 and RAID 5.
Clck Synchronze array to start the Synchronze Array Wzard and then follow
nstructons.
B-12