▍
▍
NVIDIA RAID
NVIDIA RAID
Understandng the "Define a New Array" Wndow
Use the Define a New Array wndow to
■
Select the RAID Mode
■
Set up the Strpng Block
■
Specfy whch dsks to use for the RAID Array
The SATA ports are called channels and they are assocated wth adapters. The first
dgt n the Locaton field defines the adapter that the port s assocated wth. The 2nd
dgt defines the channel.
In the example above, 1.0 means the hard drve s attached to Adapter 0, Channel 1.
The followng s a reference lst of some possble combnatons:
Seral ATA
0.0
0.1
0.2
0.3
Important
There s no such thng as Slave drve n Seral ATA. All drves are consdered to be Mas-
ter snce there s a one to one connecton between the drve and the controller.
B-4
Adapter
0.1
Adapter 0, Channel 0 (SATA1)
Adapter 0, Channel 1 (SATA2)
Adapter 0, Channel 3 (SATA3)
Adapter 0, Channel 4 (SATA4)
...
...
Channel