Default Configuration
The default setting is low priority.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
•
An unlimited number of ports can be configured as critical, high or low.
•
As power becomes unavailable, critical and high ports continue to receive power at the
expense of low ports.
Example
The following example configures the device connected to Ethernet interface 1/e1 as a high-
priority powered device.
Console(config)# interface ethernet 1/e1
Console(config-if)# power inline priority high
power inline usage-threshold
The power inline usage-threshold Global Configuration mode command configures the
threshold for initiating inline power usage alarms. To return to the default configuration, use the
no form of this command.
Syntax
power inline usage-threshold percentage
no power inline usage-threshold
•
percentage—Specifies the threshold as a percentage to compare measured power.
(Range: 1-99)
Default Configuration
The default threshold is 95 percent.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
Power over Ethernet Commands
245