Switchport Trunk Allowed Vlan; Switchport Trunk Native Vlan - Dell PowerConnect 3424 Cli Reference Manual

switchport trunk allowed vlan

The switchport trunk allowed vlan Interface Configuration mode command adds or removes
VLANs to or from a trunk port.
Syntax
switchport trunk allowed vlan {add vlan-list | remove vlan-list }
• add vlan-list — List of VLAN IDs to be added. Separate non-consecutive VLAN IDs with
a comma and no spaces. A hyphen designates a range of IDs.
• remove vlan-list — List of VLAN IDs to be removed. Separate non-consecutive VLAN
IDs with a comma and no spaces. A hyphen designates a range of IDs.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example adds VLANs 1, 2, 5 to 6 to the allowed list of Ethernet port 1/e16.
Console(config)# interface ethernet 1/e16
console(config-if)# switchport trunk allowed vlan add 1-2,5-6

switchport trunk native vlan

The switchport trunk native vlan Interface Configuration mode command defines the native
VLAN when the interface is in trunk mode. To return to the default configuration, use the no
form of this command.
Syntax
switchport trunk native vlan vlan-id
no switchport trunk native vlan
• vlan-id— Specifies the ID of the native VLAN.
Default Configuration
VID=1.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
410
VLAN Commands