Example
The following example copies traffic on port 1/e8 (source port) to port 1/e1 (destination port).
Console(config)# interface ethernet 1/e1
Console(config-if)# port monitor 1/e8
port monitor vlan-tagging
The port monitor vlan-tagging Interface Configuration (Ethernet) mode command transmits
tagged ingress mirrored packets. To transmit untagged ingress mirrored packets, use the no form
of this command.
Syntax
port monitor vlan-tagging
no port monitor vlan-tagging
Default Configuration
Ingress mirrored packets are transmitted untagged.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures all ingress mirrored packets from port 1/e9 to be transmitted
as tagged packets.
Console (config)# interface ethernet 1/e9
Console (config-if)# port monitor vlan-tagging
show ports monitor
The show ports monitor User EXEC mode command displays the port monitoring status.
Syntax
show ports monitor
Default Configuration
This command has no default configuration.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
240
Port Monitor Commands