Tacacs-Server Timeout; Tacacs-Server Source-Ip - Dell PowerConnect 3424 Cli Reference Manual

tacacs-server timeout

The tacacs-server timeout Global Configuration mode command sets the interval during which
the device waits for a TACACS+ server to reply. To return to the default configuration, use the
no form of this command.
Syntax
tacacs-server timeout timeout
no tacacs-server timeout
• timeout — Specifies the timeout value in seconds. (Range: 1 - 30)
Default Configuration
5 seconds
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example sets the timeout value to 30.
Console(config)# tacacs-server timeout 30

tacacs-server source-ip

The tacacs-server source-ip Global Configuration mode command configures the source IP
address to be used for communication with TACACS+ servers. To return to the default
configuration, use the no form of this command.
Syntax
tacacs-server source-ip source
no tacacs-server source-ip source
• source — Specifies the source IP address.
Default Configuration
The source IP address is the address of the outgoing IP interface.
Command Mode
Global Configuration mode
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
387
TACACS+ Commands