User Guidelines
There are no user guidelines for this command.
Example
The following example reactivates the line for a virtual terminal for remote console access.
Console# set line telnet active
set enable-password active
The set enable-password active Privileged EXEC mode command reactivates a locked enable
password.
Syntax
set enable-password level active
•
level—The user level (Range: 1 -15).
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example reactivates a locked level 15 enable password.
Console# set enable-password 15 active
show passwords configuration
The show passwords configuration Privileged EXEC mode command displays information
about password management.
Syntax
show passwords configuration
Default Configuration
This command has no default configuration.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
89
AAA Commands