Ip Https Authentication - Dell PowerConnect 3424 Cli Reference Manual

User Guidelines
• The additional methods of authentication are used only if the previous method returns an
error, not if it fails. To ensure that the authentication succeeds even if all methods return an
error, specify none as the final method in the command line.
Example
The following example configures the HTTP authentication.
Console(config)# ip http authentication radius local

ip https authentication

The ip https authentication Global Configuration mode command specifies authentication
methods for HTTPS server users. To return to the default configuration, use the no form of this
command.
Syntax
ip https authentication method1 [method2...]
no ip https authentication
• method1 [method2...] — Specify at least one from the following table:
Keyword
local
none
radius
tacacs
Default Configuration
The local user database is checked. This has the same effect as the command ip https
authentication local.
Command Mode
Global Configuration mode
User Guidelines
• The additional methods of authentication are used only if the previous method returns an
error, not if it fails. To ensure that the authentication succeeds even if all methods return an
error, specify none as the final method in the command line.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
78
AAA Commands
Source or destination
Uses the local username database for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS+ servers for authentication.