Memorex MVDT2002SM Service Manual page 20

NOTE
1. In case of the Clutch Ass'y installation, install it with
inserting the spring of the Clutch Ass'y into the dent of
the Coupling Gear. (Refer to Fig. 2-16-B)
2-17: CASSETTE GUIDE POST/INCLINED BASE S/T
UNIT/P4 CAP/LED REFLECTOR
(Refer to Fig. 2-17-A)
1. Remove the P4 Cap.
Unlock the support 1 and remove the Cassette Guide
2.
Post.
3. Remove the Inclined Base S/T Unit.
Remove the screw 2.
4.
5. Remove the LED Reflector.
1
Inclined Base S
Unit
LED Reflector
• Screw Torque: 5 0.5kgf•cm
DISASSEMBLY INSTRUCTIONS
Clutch Ass'y
Coupling Gear
Fig. 2-16-B
Cassette Guide Post
Inclined Base T
Unit
P4 Cap
2
Fig. 2-17-A
NOTE
1. Do not touch the roller of Guide Roller.
2. In case of the P4 Cap installation, install it with parallel
for "A" and "B" of Fig. 2-17-B.
3. In case of the Cassette Guide Post installation, install
correctly as the circled section of Fig. 2-17-C.
P4 Cap
[OK]
Cassette Guide Post
[NG]
Cassette Guide Post
B2-6
"A" "B"
Cassette Opener
Fig. 2-17-B
Fig. 2-17-C