1. Manuals
  2. Brands
  3. Memorex Manuals
  4. TV DVD Combo
  5. MVDT2402
  6. Owner's manual

Memorex MVDT2402 Owner's Manual

Combination flat color television and video cassette recorder / dvd video player
Hide thumbs Also See for MVDT2402:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
OWNER'S MANUAL
COMBINATION FLAT COLOR TELEVISION AND
VIDEO CASSETTE RECORDER / DVD VIDEO
PLAYER
MVDT2402
If you purchase a universal remote control from your local retailer, please contact the
remote manufacturer for the required programming code.
When shipped from the factory, the TV/CABLE menu option is set to the "CABLE"
(Cable Television) mode. If not using CABLE (Cable TV), set this menu option to the
"TV" mode.
Before operating the unit, please read this manual thoroughly.
5Q00401AE Cover
ATTENTION
TV/CABLE MODE SELECTION
1
26/5/04, 10:44

Advertisement

Table of Contents
loading

Related Manuals for Memorex MVDT2402

Summary of Contents for Memorex MVDT2402

  • Page 1 TV/CABLE MODE SELECTION When shipped from the factory, the TV/CABLE menu option is set to the "CABLE" (Cable Television) mode. If not using CABLE (Cable TV), set this menu option to the "TV" mode. Before operating the unit, please read this manual thoroughly.
  • Page 2 NOTE: Please keep all packaging material for at least 90 days in case you need to return this product to your place of purchase or Memorex. WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 3: Important Safeguards

    1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4.
  • Page 4 IMPORTANT SAFEGUARDS 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

  • Page 5: Power Source

    27. NOTE TO CABLE TV SYSTEM INSTALLER This reminder is provided to call the CABLE TV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con- nected to the grounding system of the building, as close to the point of cable entry as practical.

  • Page 6: Features

    • Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed up to 120 minutes to turn off automatically. • V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded with this information. V-Chip will allow you to set a restriction level.

  • Page 7: Table Of Contents

    Program playback/Random playback (CD) ... 55 Changing soundtrack language/Subtitles ... 56 Changing angles/Title selection/DVD menu ... 57 Advanced function of DVD section Setting the aspect ratio of TV screen/ Setting on screen display ... 58 Dynamic Range Control ... 59 Parental control setting ... 60 Changing the parental level ...

  • Page 8: Parts And Functions

    COAXIAL DIGITAL AUDIO OUT jack 26/5/04, 10:45 Power button Disc tray Skip buttons Play button (DVD) Stop button (DVD) Volume / buttons (TV) Open/Close button (DVD) T-Rec (Timer Recording) indicator (VCR) Rec/Otr indicator (VCR) VIDEO OUT jack VIDEO IN jack...

  • Page 9: Remote Control

    Still picture/Recording pause on/off REC/OTR Recording TIMER REC Set the unit to start recording at a preset time 41,42 TV MONITOR Temporarily view a TV channel select on the VCR while in the playback mode SLOW Slow-motion playback SLEEP Sleep timer...
  • Page 10 Remote control basics • Press POWER to turn the TV/VCR/DVD on or off. • Select your desired operating mode (TV/VCR or DVD) using TV/VCR or DVD. • Press CH +/– to move through the channels one channel at a time.

  • Page 11: Antenna Connections

    If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see page 12 for Cable TV connections. Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

  • Page 12: Cable Tv Connections

    SCRAMBLED PREMIUM CHANNELS If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the use of a converter/descrambler box, you may wish to use a signal splitter and an A/B switch box (available from the cable company or an electronics supply store).

  • Page 13: Connections To Other Equipment

    Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. Using an Audio Amplifier Rear of TV/VCR/DVD Audio (L) Output Audio (R) Output Using an AV Amplifier with built-in digital surround If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems including Dolby Digital Surround audio that sounds just like the movie.
  • Page 14 To connect the TV/VCR/DVD to a Video Game The TV/VCR/DVD can also be used as a display device for many video games. However, due to the wide variety of formats, they have not all been included in the suggested connection diagram. You’ll need to consult each component’s Owner’s Manual for additional information.

  • Page 15: Setting The Language

    GUAGE”, then press Press to select the de- sired language: English (EN- GLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press ENTER. Press TV MENU until the MENU screen is disappears. 26/5/04, 10:45 LANGUAGE/ IDIOMA/LANGUE PICTURE AUDIO PICTURE PREFERENCE / MENU...

  • Page 16: Auto Clock Setting

    Wait at least three minutes and press POWER. Press DISPLAY/CALL to check the clock on the screen. If the clock is not set, make sure you are receiving TV channels. The Auto Clock may not function properly if the reception condi- tion is not good.
  • Page 17 GMT – 10 hours AUTO AUTO SET Press TV MENU repeatedly to return to the normal screen. NOTE: To be able to select the standard time, the clock must first be set by “AUTO CLOCK” once. DAYLIGHT SAVING TIME SETTING You can set the Daylight Saving Time automatically or manually.

  • Page 18: Manual Clock Setting

    In this case, reset the present time. 5Q00401AE(18-21) EXAMPLE: Setting the clock to "8:30 AM" October, 30 (SAT), 2004. Press TV MENU. The TV/VCR menu screen will appear. Press to select the option.

  • Page 19: Tv Operation

    For channels 10 and above, press the 2 digits in order. CABLE Mode Direct Channel Selection When the TV/CABLE menu option is in the CABLE position, channels can be selected as follows: TO SELECT Cable TV CHANNELS: 1-9: Press “0”...
  • Page 20 VOL + or –. SLEEP To set the TV/VCR/DVD to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count down 10 minutes for each press of SLEEP (120, 110, ...10, 0).

  • Page 21: Closed Caption

    • Some cable systems and copy protection systems may interfere with the closed captioned signal. • If using an indoor antenna or if TV reception is very poor, the closed caption decoder may not appear or may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.

  • Page 22: Memorizing Channels

    Memorizing channels This TV/VCR/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the unit’s memory. In addition to normal VHF and UHF channels, this TV/VCR/DVD can receive up to 113 Cable TV channels.
  • Page 23 5Q00401AE(22-25) AUTOMATIC MEMORY TUNING Press TV/VCR. Press TV MENU, the TV/VCR menu screen will appear. Press to select option. Press to select “AUTO CH MEMORY”. Press . The TV will begin memorizing all the channels available in your area. Press TV MENU until the MENU screen disappears.

  • Page 24: Setting The V-Chip

    V-Chip. • To avoid forgetting the password, write it down and keep it in a safe place. 5Q00401AE(22-25) TO REGISTER PASSWORD Press TV/VCR. Press TV MENU, the TV/VCR menu screen will appear. Press to select option, then press to select “PASSWORD”.
  • Page 25 14 years old and above TV-MA: 17 years old and above When you select TV- Y7, TV-PG, TV-14 or TV-MA, press DISPLAY/CALL to show the contained rating. Press to select the desired item you want. Press the setting “ON” or “OFF”.
  • Page 26 Setting the V-Chip 5Q00401AE(26-29) TO CHANGE PASSWORD Press TV/VCR. Press TV MENU, the TV/VCR menu screen will appear. Press to select option. Press to select the “PASSWORD”. Enter the Password using the number buttons (0-9), then press ENTER. If you put a wrong number, press CANCEL.

  • Page 27: Setting The On Timer

    4-6 on page 28 " Setting the off timer". 5Q00401AE(26-29) Setting the on timer EXAMPLE: Turning on the TV to channel 12 at 7:00 AM, MON- DAY-FRIDAY. Press TV MENU. Press to select option. Press to select “ON/...

  • Page 28: Setting The Off Timer

    • To confirm the ON/OFF TIMER: Press PROGRAM twice to indicate the programs on the screen. 5Q00401AE(26-29) EXAMPLE: Turning off the TV at 11:30 PM. Press TV MENU. Press to select option. Press to select “ON/ OFF TIMER”, then press...

  • Page 29: Picture Control Adjustment

    COLOR greenish color TINT SHARPNESS makes picture clearer After your desired setting, press TV MENU until the MENU screen disappears. CANCEL Pressing CANCEL while making picture adjustments will return all adjustments to the factory preset levels. 26/5/04, 10:46...

  • Page 30: Adjusting The Picture Preference

    Bright and dynamic picture (factory-set) MOVIE Movie-like picture setting (factory-set) MEMORY Your personal preferences (set by you; see “Picture control adjustment” on the page 29). After your desired setting, press TV MENU until the MENU screen disappears. 26/5/04, 10:46 LANGUAGE/ IDIOMA/LANGUE PICTURE...

  • Page 31: Sound Control Adjustment

    BALANCE: Press to obtain an equal sound level from both speakers. After your desired setting, press TV MENU until the MENU screen disappears. CANCEL Pressing CANCEL while making sound adjustments will return all adjustments to the factory preset levels.

  • Page 32: Setting The Surround Sound/Setting The Stable Sound

    Press TV MENU until the MENU screen disappears. To cancel the surround sound mode: Follow the above step 2, then press position. Press TV MENU until the MENU screen disappears. Setting the stable sound The stable sound feature limits the highest volume level to prevent extreme changes in volume when the signal source is changed.

  • Page 33: Stereo Recording And Playback/Second Audio Program (Sap)

    Right or Left Hi-Fi channel to be heard over both TV speakers. This button has no effect when viewing a MONO video tape or TV program. Each time when you press the button, OUT- PUT SELECTION display appears on the screen for several seconds.

  • Page 34: Loading And Unloading A Cassette Tape

    Press EJECT on the TV/VCR/DVD or the Re- mote. Automatic tape eject This TV/VCR/DVD will automatically rewind the tape when the tape has ended. And when the tape is rewinded to its beginning, the cassette tape will be ejected automatically. To prevent accidental erasure Remove the erase prevention tab with a screwdriver.

  • Page 35: Cassette Tape Playback

    When the tape is being winded, you can switch to picture search mode (see next page). To do this, press REW or F.FWD and hold it down. The TV/VCR/DVD will resume the tape winding as soon as the button is released.

  • Page 36: Special Playback

    The playback will be repeated endlessly. To cancel repeat mode: Follow the above step 2, then press select the OFF position. Press TV MENU to return to the TV. To monitor a TV program Press TV MONITOR while in the playback mode. The...

  • Page 37: Zero Return Function/Video Index Search System

    INDEX mark is not recorded on the tape. 5Q00401AE(36-39) Preparation: • Press TV/VCR to select the TV/VCR mode. Press DISPLAY/CALL. The counter display shows the tape running time during playback or recording. Press COUNTER RESET at the desired tape position.

  • Page 38: Recording A Tv Program

    The tape counter and SP or SLP will appear on the screen for about 4 seconds. Set the TV/CABLE option to the appropriate position (see page 22). CABLE - CABLE TV channels Press the number buttons (0-9) or CH +/– to select the channel to be recorded.
  • Page 39 NOTES: • The pause function will be released after 5 minutes to prevent damage to the tape or the TV/VCR/DVD. The TV/VCR/DVD will change to the STOP mode. • You can select a recording channel in the recording pause mode.

  • Page 40: One-Touch Timer Recording (Otr)

    SP or SLP. The tape counter and SP or SLP will appear on the screen for about 4 seconds. Set the TV/CABLE option to the appropriate position (see page 22). CABLE - CABLE TV channels Press the number buttons (0-9) or CH + / –...

  • Page 41: Timer Recording

    16-18) and reprogram any timer recordings. 5Q00401AE(40-42) Timer recording Preparation: • Press TV/VCR to select the TV/VCR mode. • Load a cassette tape with the erase prevention tab intact. • Press DISPLAY/CALL to verify that the time and date are correct (see page 39).
  • Page 42 During timer recording the automatic rewinding mechanism does not function. 5Q00401AE(40-42) To comfirm the settings Press PROGRAM once. The TV screen displays the timer program list. Press PROGRAM again. The TV screen displays the ON/OFF TIMER setting. (once) 7 : 0 0PM 9 : 3 0PM 0 0 7 –...

  • Page 43: Duplicating A Video Tape

    Duplicating a video tape If you connect the TV/VCR/DVD to another VCR or camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power. Load a blank cassette tape with the erase preven- tion tab intact into the recording unit.

  • Page 44: Disc

    Disc This TV/VCR/DVD applies to DVD discs from Region 1 or ALL. The loaded Disc (DVD, Audio-CD and MP3/WMA/JPEG-CD) will be recognized automatically. The suitable Disc-formats are: DVD, DVD-R/RW (Video Format Only), CD-R and CD-RW. Some CD-R/RW discs may be incompatible.

  • Page 45: Preparation/Status Display Of Disc

    NOTE: When connecting to other equipment, unplug the TV/ VCR/DVD from the AC outlet. Press POWER on the TV/VCR/DVD or on the remote con- trol to turn on the TV/VCR/DVD. The Power indicator will light. • Every time you press POWER, the TV/DVD starts from TV mode.

  • Page 46: Setting Setup Language

    Setting setup language You can change the default settings to customize performance to your preference. If the TV/VCR/DVD does not operate properly: Static electricity, etc., may affect the play- er's operation. Disconnect the AC mains lead once, then connect it again.

  • Page 47: Playback Procedure

    • If a non-compatible disc is loaded, “Incor- rect Disc”, “Region Code Error” or “Paren- tal Error” will appear on the TV screen ac- cording to the type of loaded disc. If these appear, check your disc again (see pages 44 and 60).

  • Page 48: Special Playback

    If you leave the still video image or on- screen display image displayed on your TV for an extended period of time, you risk permanent damage to your television screen. Projection screen televisions are especially susceptible to such damage.

  • Page 49: Mp3/Wma/Jpeg Playback

    Press 1 1 (PLAY) to resume playback (from the scene point). • If you press 3 3 3 3 3 (STOP) again or unload the disc, the TV/ VCR/DVD will clear the stopped point. NOTES: • During MP3/WMA/JPEG-Playback, you cannot use SEARCH, A-B Repeat functions.

  • Page 50: Jpeg Cd Playback

    Press ENTER. The selected picture appears on the TV screen. Press 3 3 3 3 3 (STOP) to end playback. The file menu appears on the TV screen. If you want to watch another file, repeat steps 4-5. 26/5/04, 10:47 -/36...

  • Page 51: Setting The Jpeg Interval

    Press to select “JPEG Interval”. Language Picture Press ENTER or to select your desired time. Tv Screen Display JPEG Interval Select Files Off: Plays back one file at a time. 5 Seconds: Displays images in the form of a slide show. Every 5 seconds the image changes.

  • Page 52: Setting The Select Files

    Press SETUP in the stop mode. Language Picture Press to select “Picture”, then press or ENTER. Press to select “Select Language Picture Files”. Tv Screen Display JPEG Interval Select Files Press ENTER or to se- Language Picture lect your desired file type. Tv Screen All: Display Displays all files.

  • Page 53: Zooming/Locating Desired Scene

    • Some discs may not respond to zoom feature. 5Q00401AE(53-57) Zooming / Locating desired scene Zooming This TV/VCR/DVD will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. Press DVD to select DVD mode.

  • Page 54: Repeat Playback

    Repeat playback NOTES: • Some discs may not work with the repeat operation. • In A-B repeat mode, subtitles near point A or B may not appear. • During the A-B Repeat Playback the ANGLE feature will not operate. • You may not be able to set A-B Re- peat, depending on the scenes of the DVD.

  • Page 55: Program Playback/Random Playback (Cd)

    Program playback/Random playback (CD) NOTES: • To cancel program play, select “Clear” at step 4 and press ENTER. • The program is cancelled when you open the disc tray or turn the power off. • Random playback can not be com- bined with Repeat playback.

  • Page 56: Changing Soundtrack Language/Subtitles

    Changing soundtrack language / Subtitles NOTES: • If the desired language is not heard af- ter pressing AUDIO SELECT several times, the language is not recorded on the disc. • Changing soundtrack language is can- celled when you open the disc tray. The initial default language or available lan- guage will be heard if the disc is played back again.

  • Page 57: Changing Angles/Title Selection/Dvd Menu

    Changing angles / Title selection / DVD menu NOTES: • Depending on the DVD, you may not be able to change the angles even if multi-angles are recorded on the DVD. • Depending on the DVD, you may not be able to select the title. Depending on the DVD, a “title menu”...

  • Page 58: Setting The Aspect Ratio Of Tv Screen/Setting On Screen Display

    Setting the aspect ratio of TV screen/Setting on screen display NOTE: If the DVD disc is not formatted in the pan & scan style, it displays 4:3 style. 5Q00401AE(58-65) Setting the aspect ratio of TV screen You can select the aspect ratio of the picture.

  • Page 59: Dynamic Range Control

    DRC (Dynamic Range Control) ena- bles you to control the dynamic range so as to achieve a suitable sound for your equipment. NOTES: • This function works only during play- back of Dolby Digital recorded discs. • The level of Dynamic Range Reduction may differ depending on DVD video disc.

  • Page 60: Parental Control Setting

    DVD discs). Each setup will be retained in the memory when you turn the power off. • Depending on the discs, the TV/VCR/ DVD cannot limit playback. • Some discs may not be encoded with specific rating level information though its disc jacket says “adult.”...

  • Page 61: Changing The Parental Level

    NOTE: Do not forget the password. If you forget the password, contact the dealer that you purchased the unit from. 5Q00401AE(58-65) Changing the parental level Press SETUP in the stop mode Language Picture or No Disc. Password Press to select Parental “Parental”.

  • Page 62: Temporary Disabling Of Rating Level By Dvd Disc

    Temporary disabling of rating level by DVD disc Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. NOTE: This temporary cancellation of rating level will be kept until the disc is ejected.

  • Page 63: Setting Menu Language

    You can select the language of the disc menu messages of DVDs. 5Q00401AE(58-65) Setting menu language Press SETUP in the stop mode. Press to select “Lan- guage”. Press or ENTER. Then press to select “Menu”. Press or ENTER. Press to select your desired language, then press ENTER.

  • Page 64: Setting The Subtitle Language

    • The TV/VCR/DVD will automatically select the same lan- guage in the AUDIO setting. • When the TV/VCR/DVD selects the same language as the AU- DIO, the subtitles will not appear during playback. • When you do not use the same language as the AUDIO, the subtitles will appear during playback.

  • Page 65: Setting The Audio Soundtrack Language

    If you want to select another language, enter the language code (See the Language code list on page 66). Original: The TV/VCR/DVD will select the first priority language of each disc. Press SETUP or RETURN to remove the MENU screen. 26/5/04, 10:48...

  • Page 66: Language Code List

    Language code list Enter the appropriate code number for the initial settings "AUDIO", "SUBTITLE" and/or "MENU LANGUAGE" (see page 63~65). Language Name Code Language Name Code Language Name Code Language Name Code Abkhazian 1112 Fiji Afar 1111 Finnish Afrikaans 1116 French Albanian 2927...

  • Page 67: Reception Disturbances

    Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV/VCR/DVD is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast.

  • Page 68: Problems And Troubleshooting

    Problems and troubleshooting Use the following check list for troubleshooting when you have problems with your TV/VCR/DVD. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POWER The AC power cord is not connected.

  • Page 69: Video Head Cleaning

    DEGAUSSING SYSTEM This television has a degaussing circuit that will clear up color distortions on the TV screen that are caused by any excess magnetism which happens to get too close to the TV. This circuit is designed to operate once when the set is first plugged in.

  • Page 70: Specifications

    Specifications GENERAL Power supply: AC 120V 60Hz Power consumption: Operation: 135 W Stand by: 4 W Weight: 79.4 lbs (36.0 kg) Dimensions: 25-13/16 inches (655 mm) 22-13/16 inches (580 mm) 18-3/4 inches (477 mm) Inputs/Outputs: Video: In: 1 Vp-p/75 ohm Out: 1 Vp-p/75 ohm Audio: In: –8 dBm/50 K ohm...

  • Page 71: Warranty

    90 Day Full Warranty If this product experiences any failure due to a defect in material or workmanship within 90 days from the date of purchase, return it to your nearest Sears Parts & Repair Center, and Sears will repair it free of charge. After 90 days and until one (1) year from the date of purchase, Sears will replace defective parts free of charge.
  • Page 72 Get it fixed, at your home or ours! For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourse l f .

Table of Contents