Memorex MVDT2002SM Service Manual page 16

Slacken the wire.
Loading Motor
Pink
Loading Motor
-
+
White
2-6: TENSION ASS'Y (Refer to Fig. 2-6-B)
1. Turn the Pinch Roller Cam clockwise so that the
Tension Holder hook is set to the position of Fig. 2-6-A
to move the Tension Arm Ass'y.
2. Remove the Tension Spring.
Unlock the 2 supports 1 and remove the Tension
3.
Band.
Unlock the support 2 and remove the Tension Arm
4.
Ass'y.
Unlock the support 3 and remove the Tension
5.
Connect.
Float the hook 4 and turn it clockwise then remove the
6.
Tension Holder.
Tension Arm Ass'y
Tension Connect
Tension Spring
DISASSEMBLY INSTRUCTIONS
Fig. 2-5-C
Capstan DD Unit
L2
L1
Fig. 2-5-D
Fig. 2-6-A
1
1 Tension Band
3
Tension Arm Ass'y
Tension Holder
2
4
Fig. 2-6-B
NOTE
1. In case of the Tension Band installation, note the
direction of the installation. (Refer to Fig. 2-6-C)
2. In case of the Tension Band installation, install correctly
as Fig. 2-6-D.
3. In case of the Tension Connect installation, install as
the circled section of Fig. 2-6-E.
Tension Connect
[OK]
[NG]
Tension Connect
2-7: T BRAKE ARM/T BRAKE BAND (Refer to Fig. 2-7-A)
1. Remove the T Brake Spring.
2. Turn the T Brake Arm clockwise and bend the hook
section to remove it.
Unlock the 2 supports 1 and remove the T Brake
3.
Band.
T Brake Band
B2-2
Tension Band
Tension Connect
Tension Band
Tension Connect
Tension Band
Main Chassis
Hook section
T Brake Arm
1
1
Fig. 2-6-C
Fig. 2-6-D
Fig. 2-6-E
T Brake Spring
Fig. 2-7-A