NOTE
1.
In case of the Clutch Ass'y installation, install it with
inserting the spring of the Clutch Ass'y into the dent of
the Coupling Gear. (Refer to Fig. 2-16-B)
2-17:
CASSETTE GUIDE POST/INCLINED BASE S/T
UNIT/P4 CAP/LED REFLECTOR
(Refer to Fig. 2-17-A)
1.
Remove the P4 Cap.
2.
Unlock the support (1) and remove the Cassette Guide
Post.
3.
Remove the Inclined Base S/T Unit.
4.
Remove the screw (2).
5.
Remove the LED Reflector.
(1)
Inclined Base S
Unit
LED Reflector
• Screw Torque: 5 ± 0.5kgf•cm
DISASSEMBLY INSTRUCTIONS
Clutch Ass'y
Coupling Gear
Fig. 2-16-B
Cassette Guide Post
Inclined Base T
Unit
P4 Cap
(2)_
Fig. 2-17-A
NOTE
1.
Do not touch the roller of Guide Roller.
2.
In case of the P4 Cap installation, install it with parallel
for "A" and "B" of Fig. 2-17-B.
3.
In case of the Cassette Guide Post installation, install
correctly as the circled section of Fig. 2-17-C.
P4 Cap
[OK]
Cassette Guide Post
[NG]
Cassette Guide Post
B2-6
"A"
"B"
Cassette Opener
Fig. 2-17-B
Fig. 2-17-C