Memorex MVDT2002SM Service Manual page 126

Slacken the wire.
Loading Motor
Pink
Loading Motor
-
+
White
2-6: TENSION ASS'Y (Refer to Fig. 2-6-B)
1. Turn the Pinch Roller Cam clockwise so that the
Tension Holder hook is set to the position of Fig. 2-6-A
to move the Tension Arm Ass'y.
2. Remove the Tension Spring.
3. Unlock the 2 supports (1) and remove the Tension
Band.
4. Unlock the support (2) and remove the Tension Arm
Ass'y.
5. Unlock the support (3) and remove the Tension
Connect.
6. Float the hook (4) and turn it clockwise then remove
the Tension Holder.
Tension Arm Ass'y
Tension Connect
Tension Spring
DISASSEMBLY INSTRUCTIONS
Fig. 2-5-C
Capstan DD Unit
L2
L1
Fig. 2-5-D
Fig. 2-6-A
(1)
Tension Band
(1)
(3)
Tension Arm Ass'y
Tension Holder
(2)
(4)
Fig. 2-6-B
NOTE
1. In case of the Tension Band installation, note the
direction of the installation. (Refer to Fig. 2-6-C)
2. In case of the Tension Band installation, install correctly
as Fig. 2-6-D.
3. In case of the Tension Connect installation, install as
the circled section of Fig. 2-6-E.
Tension Connect
[OK]
[NG]
Tension Connect
2-7: T BRAKE ARM/T BRAKE BAND (Refer to Fig. 2-7-A)
1. Remove the T Brake Spring.
2. Turn the T Brake Arm clockwise and bend the hook
section to remove it.
3. Unlock the 2 supports (1) and remove the T Brake
Band.
T Brake Band
B2-2
Tension Band
Tension Connect
Tension Band
Tension Connect
Tension Band
Main Chassis
Hook section
T Brake Arm
(1)
(1)
Fig. 2-6-C
Fig. 2-6-D
Fig. 2-6-E
T Brake Spring
Fig. 2-7-A