Performing The Management Console Installation; Installation Steps - Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 Installation Manual

Hide thumbs Also See for ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5:

Table of Contents

Performing the Management

Console Installation

The Management Console can be installed on the Management Service server or on a secure PC that

has direct communication with the Management Service server. Multiple Management Console

installations can be configured to communicate with a single Management Service; however, it is

highly recommended that access to the Management Console be limited to select users.

For security reasons, we recommend that the Management Console be installed directly on the

Management Service's server.

If you want to install the Management Console on a separate workstation, ensure that the following

prerequisites are in place before beginning the installation:

Ensure that the device on which you want to install the Management Console meets the

following requirements:

Windows XP SP1, Windows XP SP2, or Windows 2000 SP4.

A 1.0 GHz processor is recommended with a minimum of 256 MB of RAM and 100 MB

of disk space available.

Copy the

ESM Setup Files

Distribution Service and the Management Service, along with the

the PC.

If you are installing the Management Console on the Management Service server, verify that

the version of Microsoft Internet Explorer is 5.5 or greater.

Click Management Console Installation from the installation interface menu.

At launch, the installer verifies that both the required .NET Framework 3.5 and WSE 2.0 SP2 are

present on the machine. If one or both are absent, they will be installed automatically before the

installation continues to the Welcome Screen (the license agreement for .NET 3.5 will need to be

accepted).

To install the Management Consoles:

1 Click Next to continue.

2 Accept the Licensing Agreement, then click Next.

3 Select either a Typical or Custom installation.

folder that contains the SSL Root Certificates for the Policy

Performing the Management Console Installation

file, onto

STInstParam.id

Table of Contents