Publishing A Policy - Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 Installation Manual

7.2.3 Publishing a Policy

To Publish a security policy with the default settings:
1 Click Create New Policy.
2 Specify a name for the policy, then click Create.
3 Save the policy, then click the Publish tab.
4 Because Endpoint Security Client users must check in to display in the tree, select the top of the
tree on the left, then double-click to populate the publishing field with all current groups and
users.
5 Click Publish to send the policy to the Policy Distribution Service.
The policy generated in this manner has the following characteristics:
A single location (Unknown) is created.
CD/DVD ROM drives are allowed.
Removable storage devices are allowed.
All communications ports (including Wi-Fi) are permitted.
The Firewall Setting, All Adaptive (all outbound traffic over networking ports is allowed;
unsolicited inbound traffic over networking ports is disallowed) is included.
For information on creating a more robust security policy, please see the
Security Management Administration
54 ZENworks Endpoint Security Management Installation Guide
Guide.
ZENworks Endpoint